User manual HOLMES HAWF2095

[. . . ] · To disconnect, grip plug and pull from wall outlet. · Always use on a dry, level surface. · Do not operate without fan grills properly in place. · This product is intended for household use ONLY and not for commercial or industrial applications. PLEASE READ AND SAVE THESE INSTRUCTIONS WARNING: To reduce the risk of fire or electrical shock, DO NOT USE THIS FAN with any SOLID STATE Fan Speed Control Device THIS PRODUCT IS EQUIPPED WITH A POLARIZED A. C. [. . . ] Lastly, pull out the built-in extender on right side to fill in the remaining space. To pull out, simply pop up the extender locks on the top and bottom of the fan housing next to the built-in extender, and set to the desired length. To secure in place, push the extender locks back down. 24" UNIT'S LENGTH PULLS OUT UP TO 7. 0" Two 3. 0" extenders, (Included in your box packed at both ends) OPERATING INSTRUCTIONS: · Make sure the rotary switch is in the OFF position. · Plug into 120V AC electric outlet. · Set the individual fan motors on either INTAKE, EXHAUST or AIR EXCHANGE using the control lever. · To start unit, select either Manual or Automatic. In Manual mode turn the rotary switch to the desired speed (HI, MED, LO) for standard operation. In Automatic mode, you must set desired temperature using the following AccutempTM instructions. Page2 ACCUTEMPTM DIGITAL CONTROL INSTRUCTIONS: Your window fan is equipped with an AccutempTM Digital Control that automatically varies the fan speed and turns the fan ON and OFF depending on the preset comfort level. This is ideal for operation at night when the temperature drops. Make sure the manual/automatic switch above display is set to automatic. Press down on the temp set buttons to program the desired temperature. To set and hold higher temperatures, press the top button, for lower temperatures, press the bottom button. Hold the button down until you see your desired temperature displayed. When you are finished setting the temperature, let go of the button. The display will blink a few times and then return to displaying the current room temperature. If the unit will not start in Automatic mode, please make sure that the "set temperature" is below the current room temperature. If the fan is stopped and you want to turn it back on, lower the temperature setting until you have reached the desired temperature. IMPORTANT: If you desire continuous running of the fan, turn the manual/automatic level to manual and adjust the hi/med/low speed button. FAN SERVICE INSTRUCTIONS: 1. Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. If you have any questions regarding this unit's operation or believe any repair is necessary, please call 1-800-5 HOLMES to speak with a Customer Service Representative. If you need to exchange the unit, please return it in its original carton, with a sales receipt, to the store where you purchased it. If you are returning the unit more than 30 days after the date of purchase, please see the enclosed warranty. [. . . ] If you have any problem with this product, please write our Customer Service Dept. , or call, 1-800-5-HOLMES. IMPORTANT RETURN INSTRUCTIONS Your warranty depends on your following these instructions if you are returning the unit more than 30 days after the date of purchase: 1. Carefully pack the item in its original carton or other suitable box to avoid damage in shipping. Before packing your unit for return; be sure to enclose: a) your name, full address with zip code and telephone number, b) a dated sales receipt or PROOF OF PURCHASE, c) your $10. 00 check for return shipping and handling charges, and d) the model number of the unit and the problem you are having. [. . . ]