User manual HOLMES HFH5505

[. . . ] 7) Always unplug the heater when not in use. 8) When unplugging, be sure to pull by the plug and not the cord. 9) DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater. 10) DO NOT operate heater with a damaged cord or plug, or after the heater malfunctions, has been damaged in any manner. [. . . ] To start the unit, push the MODE/OFF button once for the HIGH (1500 Watts) manual setting. Press the button again for the LOW (1000 Watts) manual setting. To stop the unit, press and hold the button for two seconds or keep pressing the button until all the temperature indicators are OFF. Note: The Power Light will remain lit during operation. In Manual Mode, only the LOW or HIGH power light will be lit. 1 Touch Thermostat Instructions: To take advantage of the 1 TouchTM Thermostat continue to press the MODE/OFF button until the desired temperature is set in either the HIGH (1500 Watt) or LOW (1000 Watt) setting. When ambient temperature rises above the set temperature, the heater will stop. When the ambient temperature drops below the set temperature, the heater will turn on automatically. Note: When the 1 TouchTM thermostat is set, either the HIGH or LOW power light, and the set temperature light will remain lit during operation. #1 and #2) Note: It is normal for the heater to cycle ON and OFF as it maintains the preset temperature. To prevent the unit from cycling, you need to raise the thermostat setting. The 1 TouchTM thermostat will remember the previous temperature setting after the unit has been turned off. However, if the unit is unplugged, the 1 TouchTM thermostat will be reset and will no longer remember the previous temperature setting. TROUBLESHOOTING If your heater fails to operate: · UNPLUG THE UNIT. · Make sure the electrical outlet or circuit breaker is working. If you find an obstruction turn the heater OFF, and unplug the unit. Carefully remove the obstruction and follow the reset instructions. · The temperature may be set too low. Press the MODE/OFF button until the heater restarts. If your heater fails to oscillate: · Make sure the oscillation button is pressed. · Make sure nothing is wedged between base and body. Please DO NOT attempt to open or repair the heater. Please see the Warranty for Service Instructions FIGURE 1 A. [. . . ] Carefully pack the item in its original carton or other suitable box to avoid damage in shipping. Before packing your unit for return; be sure to enclose: a) your name, full address with zip code and telephone number, b) a dated sales receipt or PROOF OF PURCHASE, c) your $7. 00 check for return shipping and handling, and d) the model number of the unit and the problem you are having. (Enclose in an envelope and tape directly to the unit before the box is sealed. ) 3. Holmes recommends you ship the package UPS ground service for tracking purposes. [. . . ]