User manual HOLMES HFH6250

[. . . ] This Warranty applies ONLY to repair or replacement of any supplied or manufactured parts of this product that, upon inspection by JCS/THG, LLC authorized personnel, is shown to have failed in normal use due to defects in material or workmanship. JCS/THG, LLC will determine whether to repair or replace the unit. This Warranty does not apply to installation expenses. Operating this unit under conditions other than those recommended or at voltages other than the voltage indicated on the unit, or attempting to service or modify the unit, will render this WARRANTY VOID. [. . . ] When unplugging, be sure to pull by the plug and not the cord. DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater. DO NOT operate heater with a damaged cord or plug, or after the heater malfunctions, has been dropped or damaged in any manner. Return appliance to manufacturer for examination, electrical or mechanical adjustment, or repair. A heater has hot and arcing or sparking parts inside. DO NOT use it in areas where gasoline, paint, or flammable liquids are used or stored. Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by JCS/THG, LLC may cause hazards. To prevent a possible fire, DO NOT block air intakes or exhaust in any manner. DO NOT use on soft surfaces, like a bed, where openings may become blocked. To disconnect heater, turn controls to OFF, then remove plug from outlet. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord, the cord shall be No. 14 AWG minimum size and rated not less than 1875 watts. If the heater will not operate, see specific instructions on Auto Safety Shut-off. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. The inside of the unit contains no user serviceable parts. All servicing should be performed by qualified personnel only. Discontinue use if plug or outlet is hot. It is recommended that the outlet be replaced if plug or outlet is hot to touch. F E AT U R E S - O P E R AT I O N S PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS TECHNICAL SPECIFICATIONS · Wattage: 1500W · Working voltage: 120V AC/60Hz interrupts the beam for three or more seconds, the heater turns off and the above icon illuminates. Once the obstruction is removed and the beam reconnects, the icon turns off and the heater restarts. CLEANING / MAINTENANCE TROUBLESHOOTING OPERATING INSTRUCTIONS 1. [. . . ] The icon for each safety feature will heater automatically restarts. blink and turn off to indicate that the SafetyMaxTM SelfCheck Panel verification is complete for that safety 4-Hour Safety Timer feature. In the unlikely event that one of the safety features This unit is equipped with a 4-hour safety timer which is is not functioning, an icon illuminates letting you know that activated when you turn on the heater. The built-in LED light a problem has occurred and the heater will not run. [. . . ]