User manual HOLMES HS4350

[. . . ] Always unplug the heater when not in use. When unplugging, be sure to pull by the plug and not the cord. DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater. DO NOT operate heater with a damaged cord or plug, or after the heater malfunctions, has been dropped or damaged in any manner. [. . . ] Press the Power / Mode button once and the display screen will switch from the current time to read FAN. Press the Power / Mode button again and the display will now read LO. Press the Power / Mode button again and the display will then read HI. The heater operates at 750 and 1500 watts in the low or high settings. To turn the unit off, simply press the Power / Mode button for a fourth time and the unit will be turned off. By turning the rotary knob located at the top right side of the heater you will be able to adjust the thermostat. As the rotary knob is turned the temperature will be reflected on the display screen simultaneously. Stop turning the knob when your desired temperature level has been achieved. The display will switch from the current time to flash the digits 12:00. Press the HOUR and MINUTE buttons until your desired operating time has been reached. The display will return to the current time after you have completed setting the HEATLOGIC time. TO ACTIVATE THE HEATLOGIC PROGRAM TIME 1. To activate your heater at the specified time that has been set, simply press the HEATLOGIC button once. A light in the display screen will be turned on, indicating that the heater is now in HEATLOGIC mode and will turn on automatically at the preset time. PLEASE NOTE: The heater will operate in the HI 1500 watt setting only, when operating in the HEATLOGIC mode. SETTING THE SAFETY SHUT DOWN TIME: In the HeatLogic mode you have the ability to choose the amount of time the heater will operate before automatically turning off. The number 30 will appear on the display screen indicating the number of minutes the heater is currently set to operate in the HEATLOGIC mode. To change from 30 min, hold SET button and display will change to 45. If you continue to hold the SET button the display will change to 60, then to 15. Release the SET button when you have determined the amount of time you would like the heater to operate in the HEATLOGIC mode. PLEASE note that the ability to select an operating time is only available when the HEATLOGIC mode has been activated. CLEANING/MAINTENANCE During Season Care: Always unplug the heater, before moving or cleaning. Carefully wipe the unit with a soft, damp cloth. [. . . ] Before packing your unit for return; be sure to enclose: a) Your name, full address with zip code and telephone number, b) A dated sales receipt or PROOF OF PURCHASE, c) Your $7. 00 check for return packaging, and d) The model number of the unit and the problem you are having. (Enclose in an envelope and tape directly to the unit before the box is sealed. ) 3. Holmes recommends you insure the package (as damage in shipment is not covered by your warranty). All shipping charges must be prepaid by you (as noted in paragraph F). [. . . ]