User manual HOLMES HT30

[. . . ] DO NOT operate without fan grills properly in place. DO NOT operate any appliance with a damaged cord or plug, if motor fan fails to rotate, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Return appliance to manufacturer for examination, electrical or mechanical adjustment, or repair. DO NOT operate in the presence of explosive and/or flammable fumes. [. . . ] To reduce movement of the power cord during use or transportation, turn the cord clip appoximately 90 degrees to the right until the clip covers the power cord. Step 5: Place the fan right side up and it is ready for use. ILLUSTRATIONS FIGURE 1 A FIGURE 2 B FEATURES - OPERATIONS OPERATING INSTRUCTIONS IMPORTANT: Step 1: Set the fan base on a dry, level surface. Step 2: Plug the cord into any standard 120-volt A/C outlet. To turn the fan on press one of the three speed buttons marked (1) low, (2) medium, or (3) high. To turn the fan off press the button marked (0) off. Step 3: The SPEED is adjusted by pressing one of the three buttons for your desired level of cooling comfort. Step 4: The OSCILLATION button is located on the top of the fan control panel. To stop oscillation, push the button again. FIGURE 3 C D E CLEANING/MAINTENANCE INSTRUCTIONS Follow these instructions to correctly and safely care for your Holmes Tower Fan. Please remember: · Always unplug the fan before cleaning or disassembling. · Do not allow water to drip on or into the fan motor housing. · Do not use any of the following as a cleaner: gasoline, thinner, benzine. · We also recommend the periodic cleaning of this fan by lightly running a vacuum cleaner nozzle over the fan grill to remove any dust or dirt that may have accumulated inside or on the unit. Fan Head and Base Cleaning Using a soft, moist cloth, with or without a mild soap solution, carefully clean the fan housing. Do not allow the motor or other electrical components to be exposed to water. FIGURE 4 F G H A. BASE (FIGURE 4) HT30 fan 9/01 FAN STORAGE Your fan can be stored in the off-season either partially disassembled or assembled. It is important to keep it in a safe, dry location. · If stored disassembled, we recommend using the original (or appropriately sized) box. · If stored assembled or partially assembled, remember to protect the fan head from dust. WARRANTY INFORMATION SERVICE INSTRUCTIONS 1. Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. If you have any questions regarding this unit's operation or believe any repair is necessary, please write to our Consumer Service Department. If you need to exchange the unit, please return it in it's original carton, with a sales receipt, to the store you purchased it. If you are returning the unit more than 30 days after the date of purchase, please see the enclosed warranty. [. . . ] Carefully pack the item in its original carton or other suitable box to avoid damage in shipping. Before packing your unit for return; be sure to enclose: a) Your name, full address with zip code and telephone number, b) A dated sales receipt or PROOF OF PURCHASE, c) Your $7. 50 check for return packaging, and d) The model number of the unit and the problem you are having. (Enclose in an envelope and tape directly to the unit before the box is sealed. ) 3. Holmes recommends you insure the package (as damage in shipment is not covered by your warranty). [. . . ]