User manual HONEYWELL 2077D

[. . . ] Use 789 79 B A0B this code the first time youA 0open the safe. For security purposes, you must program into Programming your Personal Code 123 456 Closing and Securing your Safe 1. Never overfill the safe or obstruct the door from closing completely and properly. [. . . ] Press the "B" button and your personal code is saved. Write down your new code and store it away from the safe. Security Lockout The safe is designed to automatically lockout the keypad if the wrong code is entered multiple times. · After 3rd error: 20 second lock-out · 3 more errors: 5 minute lock-out · 3 more errors: 1 hour lock-out If you cannot remember your personal code, you can always use the override key to open the safe. See Opening Your Safe for instructions. English 2 Illustrations Fig. 3 123 456 789 A0B 123 456 789 A0B 123 456 789 A0B Fig. 6 123 456 789 A0B 123 456 789 A0B 123 456 789 A0B + - + - English 123 456 789 A0B 123 456 789 A0B 3 Checking Batteries On the digital keypad, press the "B" button. · If the red LED light flashes, change the batteries within 2 months. · If no LED lights, change the batteries immediately. Appropriate Use of Your Safe · Your Anti-Theft safe is designed to provide protection against theft and minimal fire damage. It does not protect the contents from serious fire or water damage. · For information on safes that provide protection from fire and water damage, see your Home Security retailer or visit our website at www. honeywellsafes. com Troubleshooting · Safe will not open with your personal code: Open the safe using the override key and re-program your code. · No LED Lights: Remove the override lock cover and open safe with the override key. If you continue to experience problems or have questions regarding your safe, please contact Sisco customer service at 800-223-8566. Do not return safe to the retailer unless instructed to do so by Customer Service Representative. Thank you! Changing Batteries Changing batteries will not erase your personal code. Open the safe door using your personal code and locate the battery compartment on the lower inside portion of the door. Push in on the left side of the cover and remove by sliding to the right (Fig. Carefully replace the batteries (4 -"AA") using the positioning guide printed on the inside of the battery compartment. [. . . ] In no event shall SISCO be liable for consequential or incidental damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights and you may also have other rights which vary from state to state. [. . . ]