User manual HONEYWELL AZ DATASHEET

[. . . ] 80 Pressure transmitters Adjustable display range Ty p e s e r i e s A Z D i g i t a l d i s p l a y, p l u g s o n t o t r a n s m i t t e r AZ display modules show the output of a transmitter from the MODUFLEX system on an LED display. [. . . ] V, mA, bar, mbar, %, °C, °F, psi, m, cm (filling level), m3, cm3 (volume) etc. AZ 331 Technical data 3 1/2 digit LED display, 7 mm high, adjustable display range: ­50 to +1999 Supply voltage 24 VAC or 24 VDC. Via ribbon cable from the basic module Signal voltage (input) 0­10 V. Signal input via ribbon cable from the evaluation module or from other modules. Signal input switchable with slide switch 9. Normal setting: D (output signal from evaluation module is displayed) Decimal point Set with slide switch Factory setting Input signal 0­10 V 0­10. 00 ± 1 digit Power consumption Max. 1 W Degree of IP 65, in the installed protection state Dimensions Height: 1 module unit = 34 mm Display By setting the input selector switch 9 to position E, the unit can be made to display signals generated by other modules. Furthermore, in its condition on delivery (factory setting 0­10. 0), the display module can be used for accurately setting the operating range of a transmitter. All controls are accessible from the front, after removing the window. [. . . ] for y-signal 100%) Position D: Output signal of the evaluation module is displayed (normal setting) Position E: Signal of another module is displayed For setting the decimal point Decimal point on/off Decimal point switch 10 Decimal point switch 11 Operator interface AZ 331 (3 1/2 digit) See above for description of controls. [. . . ]