Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HONEYWELL HAV 25. We hope that this HONEYWELL HAV 25 user guide will be useful to you.
Lastmanuals help download the user guide HONEYWELL HAV 25.
Detailed instructions for use are in the User's Guide.
[. . . ] Hometronic ball valve HAV 20, 25, 32
Mounting and operation
Application
Application
The motor-driven Hometronic ball valve HAV opens or closes drinking water conduits by means of a ball valve. It is controlled by the Hometronic Manager and allows e. g. [. . . ] Touching a live contact can cause critical injuries. All work may only be carried out by authorized specialized personnel. De-energize the corresponding fuse during all work on the module.
It is advisable to install a cleaning filter in order to prolong the service life of the valve and to protect the seals against mechanical damage. DIN 1988.
Selecting the mounting site
Depending on the mounting site selected, the ball valve can be used to control the water supply of an entire house or of an individual apartment.
1. Ball valve
Mounting The ball valve can impair the function of sprinkler systems or similar water-based extinguishing systems. Before mounting the module check whether an extinguishing system is installed or is to be installed. If appropriate, select a different mounting site.
Caution!
Loosen the 2 screws M 6x15 (3)
on the bottom of the drive (1).
Lift the drive off the valve (2). Install the ball valve at the
corresponding plumbing by using a suitable tool (openended spanner). Mount the device switch HS 30 as described in the mounting and operating instructions of the device switch. Ensure that the cable has the right length!
Electrical connection
Install an all-pole switch
with 3 mm opening on site in the incoming line. Wire the device switch and ball valve in accordance with the adjacent diagram and connect them to the power supply.
Mounting
Assembling the ball valve
When selecting the mounting site ensure that: · The ball valve is accessible and operable when power fails. · The drive is mounted parallel to the plumbing. [. . . ] initial torque Connecting cable HAV 20 HAV 25 HAV 32 0. 88 kg 1. 10 kg 1. 42 kg DN 20 DN 25 DN 32 230 V AC +6 . . . 15% 50. . . 60 Hz 5 (1) A, 230 V, 50 Hz 7. 5 VA 3 VA IP 44 conforming to IEC 529 2 conforming to EN 60335-1 Refer to "Dimensions" 30 sec for 90° PN 16 8 Nm 4 x 0. 5 mm, 2 m
Dimensions
Des. HAV 20 HAV 25 HAV 32
G ¾" 1" 1¼"
KVS 41 68 123
PN 16 16 16
A 144 153 163
B 124. 5 129. 5 134. 5
C 19. 5 23. 5 28. 5
D 90. 5 104 119. 5
E 77. 5 90 105. 5
H 84 93 103
All dimensions in mm, KVS in m3/h
Honeywell AG Böblinger Straße 17 D 71101 Schönaich Telephone ++49 (0) 7031 637-300
The right is reserved to make This company is certified to modifications This document is definitive for the enclosed product and replaces all previous publications. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HONEYWELL HAV 25
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HONEYWELL HAV 25 will begin.
