User manual HONEYWELL M6410C-L DATASHEET

[. . . ] The M6410C/L and M7410C actuators are suitable for Honeywell Excel series controllers as well as for Honeywell individual room temperature controllers. These controllers track the precise valve position by counting the number of individual control pulses which move the valve from one position to another. [. . . ] Adjust the valve to the correct position before mounting the actuator. Fig. Remove protection cap The actuator must be mounted by hand. Do not use tools or additional force as this may damaged actuator and valve. Mounting positions MOUNTING Before the actuator is fixed to the valve, you must remove the adjustment cap (Fig. Make sure that the actuator is in the retract position (factory-supplied position) before fixing the actuator to the valve body. Fig. Mounting the actuator EN0B-0096GE51 R0909 2 M6410C/L, M7410C Small 3-Position Linear Valve Actuators ELECTRIC WIRING OF MOTOR A fuse with a contact gap of at least 3 mm for each pole must be fitted with the fixed installation. The electrical installation must comply with the wiring diagram shown in Fig. 4. 230 Vac: L 2A, VDE 0641, IEC 269 COMMISSIONING ADVICE A functional check of the valve actuator can be carried out by changing the controller setpoint by 5 °C or more. 6) indicates whether the valve is opening or closing. M 17. 8 mm 11. 7 mm CABLE COLORS FOR 24-V MODELS (M6410C, M7410C) Fig. Movement of the actuator stem COM WHITE GREEN BROWN AUXILIARY SWITCHES CABLE COLORS FOR 230-V MODELS (M6410L) The actuators with the OS-number M*****40** feature two auxiliary switches, each with its own cable. Auxiliary switch S1 switches when the stem reaches its fixed switchpoint. Auxiliary switch S2 switches when the stem reaches its adjustable switchpoint. N BLUE DN15 DN20 DN25 DN40 BLACK opening closing A B BROWN WORKING OPERATION PORT A a b c a b c A B closing opening A B A B Fig. Auxiliary switch cables DN15 DN40 DN15 DN20 closing opening A AB A AB Adjustment of Auxiliary Switch 2 Auxiliary switch 2 should be adjusted by a skilled person, only. Move the actuator to the position where the switch is to be tripped. [. . . ] Electric wiring of auxiliary switch Application Example: Switching Off an Electrical Appliance 2-Way-Valve DN 15, DN 20 49 60 housing type `A' 60 housing type `B' 49 82 109 E. fan, pump etc. 87 BLUE housing type `C' max. [. . . ]