User manual HONEYWELL RTH6300B

[. . . ] Displays both room temperature and temperature setting. Removable battery holder for fast, easy replacement. Built-in compressor protection. 2 RTH6300B Programmable Thermostat This thermostat is ready to go! Your new thermostat is pre-programmed and ready to go. All you have to do is set the time and day. Then check the settings below and change if needed: 1 2 3 4 Set time and day (required for proper operation). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See page 6 Select fan setting (Auto/On): Preset to Auto . . . . . . . . . . . . . . . . . . . . . . To change, see page 7 Select system setting (Heat/Cool): Preset to Heat . . . . . . . . . . . . . . To change, see page 8 Program schedules: Preset to energy-saving levels while you're at work or asleep (assumes you wake at 6 am, leave at 8 am, return at 6 pm and go to bed at 10 pm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . To change, see pages 9-11 ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time, and manually adjust the temperature (see pages 12-13). 3 Operating Manual Quick reference to controls Digital display (see page 5) Battery holder (see page 15) Temperature buttons Press to adjust temperature settings (see page 11-13) Hold button Press to override programmed temperature control (see page 13) Function buttons Press to select the function displayed just above each button. (Functions change depending on the task. ) 4 RTH6300B Programmable Thermostat Quick reference to display screen Current inside temperature Low battery warning (see page 15) Replace Battery Current time/day (see page 6) Heat Setting Inside Current program period Wake/Leave/Return/Sleep (see pages 9-11) Set clock/day/schedule Press to set time, day or program schedules (see pages 6 & 11) 75 Wake ° Temperature setting (see pages 11-13) System status On when "calling" for heating or cooling; flashes when waiting for compressor restart (see page 14) System setting (Heat/Cool/Off; see page 8) Fan setting (Auto/On; see page 7) 6:30 Wed Fan Auto AM 75 ° Heat On System Heat Set Clock/Day/ Schedule Function buttons Press the button beneath each function to view or change settings (functions change depending on the task) 5 Operating Manual Set the time and day Press SET CLOCK /DAY /SCHEDULE, then adjust time 4:30 Set Clock/Day/ Schedule Fan Auto PM System Heat 1 Press the SET CLOCK/DAY/SCHEDULE button, then press or to set the clock time. [. . . ] (See next page to adjust times and temperatures of each time period. ) Heat (Mon-Fri) Wake (6:00 am) Cool (Mon-Fri) Heat (Sat-Sun) Cool (Sat-Sun) Leave (8:00 am) Return (6:00 pm) Sleep (10:00 pm) 70 ° 62 ° 70 ° 62 ° 75 ° 83 ° 75 ° 78 ° 10 [Or cancel period] [Or cancel period] 70 ° 62 ° 70 ° 62 ° [Or cancel period] [Or cancel period] 75 ° 83 ° 75 ° 78 ° RTH6300B Programmable Thermostat To adjust program schedules Set Clock/Day/ Schedule Fan Auto System Heat Done Set Day Set Schedule Set Schedule Heat Setting 8:00 Leave Done CancelPeriod AM 62 ° 1 Press SET CLOCK/DAY/SCHEDULE, then SET SCHEDULE. 2 Press or to set your weekday Wake time (Mon-Fri), then press NEXT. 3 Press or to set the temperature for this time period, then press NEXT. 4 Set time and temperature for the next time period (Leave). Repeat steps 2 and 3 for each weekday time period. 5 Press NEXT to set weekend time periods (Sat-Sun), then press DONE to save & exit. Note: Make sure the thermostat is set to the system you want to program (Heat or Cool). Note: You can press CANCEL PERIOD to eliminate unwanted time periods (except Wake). 11 Mon Tue Wed Thu Fri Next Operating Manual Program schedule override (temporary) Press to temporarily adjust temperature Inside 69 ° Temporary Heat Setting 6:30 Fan Auto AM 75 ° Press or to immediately adjust the temperature. This will temporarily override the temperature setting for the current time period. The new temperature will be maintained only until the next programmed time period begins (see page 10). For example, if you want to turn up the heat early in the morning, it will automatically be lowered later, when you leave for the day. To cancel the temporary setting at any time, press RUN SCHEDULE. Run Schedule System Heat Press to cancel temporary setting and resume program schedule Note: Make sure the thermostat is set to the system you want to control (heat or cool). 12 RTH6300B Programmable Thermostat Program schedule override (permanent) Press to permanently adjust temperature Inside Heat Setting 69 ° Hold 6:30 Fan Auto AM 75 Press HOLD to permanently adjust the temperature. This will override the temperature settings for all time periods. The "Hold" feature turns off the program schedule and allows you to adjust the thermostat manually, as needed. Whatever temperature you set will be maintained 24 hours a day, until you manually change it, or press RUN SCHEDULE to cancel "Hold" and resume the programmed schedule. ° Run Schedule System Heat Press to cancel "Hold" setting and resume program schedule Note: Make sure the thermostat is set to the system you want to control (heat or cool). 13 Operating Manual Built-in compressor protection Inside 75 ° Cool Setting 6:30 Fan Auto AM 75 ° This feature helps prevent damage to the compressor in your air conditioning or heat pump system. Damage can occur if the compressor is re-started too soon after shutdown. This feature forces the compressor to wait for a few minutes before restarting. During the wait time, the display will flash the message Cool On (or Heat On if you have a heat pump). When the safe wait time has elapsed, the message stops flashing and the compressor turns on. Set Clock/Day/ Schedule Cool On System Cool Message flashes until safe restart time has elapsed 14 RTH6300B Programmable Thermostat Battery replacement Press down and pull to remove Install fresh batteries immediately when the REPLACE BATTERY warning begins flashing. The warning flashes about two months before the batteries are depleted. Even if the warning does not appear, you should replace batteries once a year, or before leaving home for more than a month. Replace Battery Insert fresh AA alkaline batteries, then reinstall battery holder If batteries are inserted within two minutes, the time and day will not have to be reset. All other settings are permanently stored in memory, and do not require battery power. 15 Operating Manual In case of difficulty If you have difficulty with your thermostat, please try the suggestions below. Most problems can be corrected quickly and easily. Display is blank · Make sure fresh AA alkaline batteries are correctly installed (see page 15). Temperature settings do not change Make sure heating and cooling temperatures are set to acceptable ranges: · · Heat: 40° to 90°F (4. 5° to 32°C). Cool: 50° to 99°F (10° to 37°C). To restore Energy Star® default settings Follow these steps to restore Energy Star default settings (see page 10): 1 Press SET CLOCK /DAY /SCHEDULE. 3 Press DONE and NEXT at the same time for 4 seconds. 16 RTH6300B Programmable Thermostat In case of difficulty Heating or · Press SYSTEM button to set system to Heat. [. . . ] 17 · Operating Manual Customer assistance For assistance with this product, please visit www. honeywell. com/yourhome. Or call Honeywell Customer Care toll-free at 1-800-468-1502. Model number xxxxxxx Date code xxxxxxx To save time, please remove the battery holder and note your model number and date code before calling. Accessories/replacement parts To order, please call Honeywell Customer Care toll-free at 1-800-468-1502. Battery holder. . . . . . . . . . . . . . . . . . . . . . Part No. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. [. . . ]