Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HONEYWELL SLF3. We hope that this HONEYWELL SLF3 user guide will be useful to you.
Lastmanuals help download the user guide HONEYWELL SLF3.
Detailed instructions for use are in the User's Guide.
[. . . ] The airflow sensor contains a sensor element which is sensitive to mechanical loading and wich must not be touched with hard and pointed objects. Any cleaning that may be necessary is possible in water (also with addition of detergents). [. . . ] If the sensor cable is laid in a conduit with other cables (e. The sensor must be connected with the evaluation unit corresponding to the adjacted connection diagram. The terminals of the sensor must be connected with the terminals of the evaluation unit (see connection diagram). 5 mm) If the probe cable is run together with other cables use shielded cable. A2 = brown b2 = black a3 = blue Turn , , Sensitivity" towards Maximum (+) until the yellow LED switches on and the output relay will switch. For stable conditions turn slightly beyond switching point. For verification of correct operation reduce or switch off flow. The yellow LED will switch off and the output relay will switch. While the plant is being started up (still no airflow present), the output contact is activated and the flow condition singalled. the time for the switch-on bypass is adjustable on the potentiometer from 2-60 s. [. . . ] Therefore switch on the airflow generator earlier or together with the airflow monitor. Setting elements: s = Sensitivity (High sensitivity (+) for low switching point / low flow speed) t = time for switch-on bypass (2-60s) Signallamps (LEDs) 1 = Flow present or switch-on bypass active 2 = Supply voltage present [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HONEYWELL SLF3
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HONEYWELL SLF3 will begin.
