User manual HONEYWELL TH6110D

[. . . ] EnergyStar® compliant to greatly reduce your heating/cooling expenses. Large, clear, backlit display is easy to read -- even in the dark. Displays both room temperature and temperature setting. Removable battery holder for fast, easy replacement. [. . . ] Set to the time you leave home and the temperature you want while you are away (usually an energy-saving level). 62 ° 6:00 pm RETURN Set to the time you return home and the temperature you 70 ° SLEEP 10:00 pm want during the evening, until bedtime. Set to the time you go to bed and the temperature you want overnight (usually an energy-saving level). 9 62 ° Operating Manual EnergyStar® settings for maximum cost savings This thermostat is pre-set to use EnergyStar® program settings. We recommend these settings, since they can reduce your heating/cooling expenses by as much as 33%. (See next page to adjust times and temperatures of each time period. ) Heat (Mon-Fri) Wake (6:00 am) Cool (Mon-Fri) Heat (Sat-Sun) Cool (Sat-Sun) Leave (8:00 am) Return (6:00 pm) Sleep (10:00 pm) 70 ° 62 ° 70 ° 62 ° 75 ° 83 ° 75 ° 78 ° 10 [Or cancel period] [Or cancel period] 70 ° 62 ° 70 ° 62 ° [Or cancel period] [Or cancel period] 75 ° 83 ° 75 ° 78 ° FocusPROTM TH6110D/TH6220D Programmable Thermostat To adjust program schedules Set Clock/Day/ Schedule Fan Auto System Cool Done Set Day Set Schedule Set Schedule Heat Setting 8:00 Leave Done CancelPeriod AM 62 ° 1 Press SET CLOCK/DAY/SCHEDULE, then SET SCHEDULE. 2 Press or to set your weekday Wake time (Mon-Fri), then press NEXT. 3 Press or to set the temperature for this time period, then press NEXT. 4 Set time and temperature for the next time period (Leave). Repeat steps 2 and 3 for each weekday time period. 5 Press NEXT to set weekend time periods (Sat-Sun), then press DONE to save & exit. Note: Make sure the thermostat is set to the system you want to program (Heat or Cool). Note: You can press CANCEL PERIOD to eliminate unwanted time periods (except Wake). 11 Mon Tue Wed Thu Fri Next Operating Manual Program schedule override (temporary) Press to temporarily adjust temperature Inside 69 ° Temporary Heat Setting 6:30 Fan Auto AM 75 ° Press or to immediately adjust the temperature. This will temporarily override the temperature setting for the current time period. The new temperature will be maintained only until the next programmed time period begins (see page 10). For example, if you want to turn up the heat early in the morning, it will automatically be lowered later, when you leave for the day. To cancel the temporary setting at any time, press RUN SCHEDULE. Run Schedule System Heat Press to cancel temporary setting and resume program schedule Note: Make sure the thermostat is set to the system you want to control (heat, cool or auto). 12 FocusPROTM TH6110D/TH6220D Programmable Thermostat Program schedule override (permanent) Press to permanently adjust temperature Inside Heat Setting 69 ° Hold 6:30 Fan Auto AM 75 Press HOLD to permanently adjust the temperature. This will override the temperature settings for all time periods. The "Hold" feature turns off the program schedule and allows you to adjust the thermostat manually, as needed. Whatever temperature you set will be maintained 24 hours a day, until you manually change it, or press RUN SCHEDULE to cancel "Hold" and resume the programmed schedule. ° Run Schedule System Heat Press to cancel "Hold" setting and resume program schedule Note: Make sure the thermostat is set to the system you want to control (heat, cool or auto). 13 Operating Manual Auto Changeover (heat/cool) Set Clock/Day/ Schedule Fan Auto System Auto Auto Changeover is a feature used in climates where both air conditioning and heating are used on the same day. When the system is set to Auto, the thermostat automatically selects heating or cooling depending on the indoor temperature. Heat and cool settings must be at least 3 degrees apart. The thermostat will automatically adjust settings to maintain this 3-degree separation (called "deadband"). The 3-degree separation between heating and cooling set temperatures is fixed, and cannot be changed. 14 Press until screen displays "Auto" Note: The Auto system setting may not appear, depending on how your thermostat was installed. FocusPROTM TH6110D/TH6220D Programmable Thermostat Built-in compressor protection Inside 75 ° Cool Setting 6:30 Fan Auto AM 75 ° This feature helps prevent damage to the compressor in your air conditioning or heat pump system. Damage can occur if the compressor is restarted too soon after shutdown. This feature forces the compressor to wait for a few minutes before restarting. During the wait time, the display will flash the message Cool On (or Heat On if you have a heat pump). When the safe wait time has elapsed, the message stops flashing and the compressor turns on. Set Clock/Day/ Schedule Cool On System Cool Message flashes until safe restart time has elapsed 15 Operating Manual Adaptive Intelligent RecoveryTM (AIR) Adaptive Intelligent Recovery eliminates guesswork when setting your schedule. It allows the thermostat to "learn" how long your furnace and air conditioner take to reach the temperature you want. [. . . ] HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you. 22 FocusPROTM TH6110D/TH6220D Programmable Thermostat Limited 5-year warranty THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE FIVE-YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. [. . . ]