User manual HONEYWELL V2220 DATASHEET

[. . . ] VALVE WITH REVERSED PORTS FOR DISTIRBUTION SYSTEMS PRODUCT DATA V2220 Fourway Distribution Valve Application Distribution valves of this type are used to connect the supply and return of a radiator to the corresponding pipes of a one- or two-pipe heating loop. [. . . ] 10 bar (145 psi) 2. 4 (2. 81) NOTE: See remark at kvs values Design The distribution valve consists of: · Valve housing PN10, DN15 · with external threads, or · with internal threads to DIN2999 (ISO7) for threaded pipe or copper/precision steel pipe 10. . . 18 mm using compression pipe fittings (see `Accessories') · Pre-settable valve insert · Protection cap · Union-nut and radiator tailpiece · Compression ring and nut for Ø15 mm riser tube Operating temperature Operating pressure kv(cv)-value Function The Fourway distribution valve supplies incoming heating water to the connected riser tube and heating water returning from the radiator back into the heating circuit. This can be the next radiator or the return pipe to the distribution manifold. The radiator is shutoff from the heating circuit by closing the valve cartridge. The following radiators in the heating circuit are not affected by this. Materials · Valve housing made of nickel-plated red bronze · Valve insert made of brass with EPDM O-rings and soft seals · Union-nut, tailpiece and cap made of nickel-plated brass Honeywell Subject to change EN0H-2400GE25 R1206 V2220 FOURWAY DISTRIBUTION VALVE Dimensions and Ordering Information Fig. External threads version NOTE: All dimensions in mm unless stated otherwise. Fig. Available versions and OS-Nos (OS=Ordering Specification) Body type External threads Internal threads DN 15 15 kvs-value, 2-pipe 2. 40 2. 40 OS-No. [. . . ] Subject to change · All rights reserved Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Ecublens, Route du Bois 37, Switzerland or by its Authorized Representative. [. . . ]