User manual HOOVER HVA 300

[. . . ] 2. - Add detergent and additives, not exceeding the maximum level indicator. · detergent for pre-wash I · detergent for wash programme II · bleach · fabric conditioner SELECTING THE DESIRED PROGRAMMES AND OPTIONS 3. - Turn the programme selector (A) to the desired programme. 4. - Press the key or keys for any options desired (C1, C2, C3, C4, C5, C6, C7, C8). C1 super fast key When this key is engaged programme times are cut by as much as 50 minutes, depending on the wash programme and temperature selected. [. . . ] C2 pre-wash key This is useful for heavily soiled washing. This adds a short additional wash before the main wash. The key can be activated only in Cottons, Mixed and Synthetics programmes. To activate this option, always press the key before pressing the start key (H). C3: easy iron key This function helps reduce creasing, depending on the programme selected and the type of fabric washed. Intermediate spins during rinses are eliminated. Intermediate spins during rinses are eliminated and the machine stops before the final spin, which is a gentle spin. Intermediate spins during rinses are eliminated and the machine stops before the final spin. The machine stops before the final spin. Intermediate spins during rinses are eliminated To complete the wash cycle in the Delicates , Woollens, Hand wash and Mix&wash programmes, press the Easy Iron key again: the machine will empty and perform the required spin. To empty machine of water with no spin, cancel the ongoing programme and select the Empty programme. Relative time mode. - Time is displayed as a total, i. e. we can choose that the machine will start, or that the programme will end, with the addition of time to the clock reading. For example, if the time on the clock is 10:00 and you want the programme to start at 12:00, add two hours. The machine will start at 10:00 plus 2:00, i. e. To choose one of the two options, after accessing the menu, press the key C1 and hold it down until the time selection screen is displayed. Then press C4 in order to change the selection. To programme a delayed start: 1. - Select the programme and the options desired. 2. - Press the key C5 and hold it down until the option you have chosen, i. e. " or "Start of programme at . . . ", is displayed. 3. - With the option chosen, press C1 or C3 and hold it down until the time is displayed that you want. The start time selected, or final time selected, will be displayed. [. . . ] The start time selected, or final time selected, will be displayed. If you wish to cancel the timed start that you have programmed, press the key C5 and hold it down for about three seconds. The washing machine will carry out the programme chosen. To change or cancel a programme To modify the programme selected once it has star ted, proceed as follows: a) Press the key H and hold it down until "programme paused", followed by "programme cancelled", is displayed. [. . . ]