User manual HOTPOINT 642 THC P/IX/HA
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HOTPOINT 642 THC P/IX/HA. We hope that this HOTPOINT 642 THC P/IX/HA user guide will be useful to you.
Lastmanuals help download the user guide HOTPOINT 642 THC P/IX/HA.
Manual abstract: user guide HOTPOINT 642 THC P/IX/HA
Detailed instructions for use are in the User's Guide.
[. . . ] 642 THC W/IX/HA THC 642 IX/HA PL
Operating Instructions, 1 Warnings, 2 Assistance, 3 Description of the appliance, 4 Installation, 5 Start-up and use, 9 Precautions and tips, 9 Maintenance and care, 10 Troubleshooting, 10
PÅYTA Spis treÅci
Instrukcja obsÅugi, 1 Ostrzezenia, 2 Serwis Techniczny, 3 Opis urzÄ
dzenia, 4 Instalacja, 11 Uruchomienie i uÅ¼ytkowanie, 15 Zalecenia i Årodki ostroÅ¼noÅci, 15 Konserwacja i utrzymanie, 16 Anomalie i Årodki zaradcze, 16
WARNING: The appliance and its accessible parts become hot during use. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision. [. . . ] Adapting to different types of gas To adapt the hob to a different type of gas other than default type (indicated on the rating plate at the base of the hob or on the packaging), the burner nozzles should be replaced as follows: 1. Unscrew the nozzles using a socket spanner of the appropriate size, and replace them with nozzles for the new type of gas (see table 1 âBurner and nozzle characteristicsâ). Reassemble the parts following the above procedure in the reverse order. Once this procedure is finished, replace the old rating sticker with one indicating the new type of gas used. Â¢ Adjusting the burnersâ primary air Does not require adjusting. The hob can only be installed above built-in ovens with a cooling ventilation system. Electrical connection
Hobs equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate (this is located on the lower part of the appliance). If the appliance is to be installed above a built-in electric oven, the electrical connection of the hob and the oven must be carried out separately, both for electrical safety purposes and to make extracting the oven easier. Connecting the supply cable to the mains Install a standardised plug corresponding to the load indicated on the data plate. The appliance must be directly connected to the mains using an omnipolar circuit-breaker with a minimum contact opening of 3 mm installed between the appliance and the mains. The circuit-breaker must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the circuit-breaker). The supply cable must not come into contact with surfaces with temperatures higher than 50Â°C. The installer must ensure that the correct electrical connection has been made and that it is compliant with safety regulations. Before connecting to the power supply, make sure that: â¢ the appliance is earthed and the plug is compliant with the law. Â¢ the socket can withstand the maximum power of the appliance, which is indicated on the data plate. Â¢ the voltage is in the range between the values indicated on the data plate. Â¢ the socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it. Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. The cable must be checked regularly and replaced by authorised technicians only (see Assistance). The manufacturer declines any liability should these safety measures not be observed. Remove the knob and adjust the adjustment screw, which is positioned in or next to the tap pin, until the flame is small but steady. [. . . ] Before calling the service centre for assistance, check if anything can be done. First, check to see that there are no interruptions in the gas and electrical supplies, and, in particular, that the gas valves for the mains are open. Check whether: â¢ The gas holes on the burner are clogged. Â¢ All the movable parts that make up the burner are mounted correctly. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HOTPOINT 642 THC P/IX/HA
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HOTPOINT 642 THC P/IX/HA will begin.