User manual HOTPOINT 7OF 53 C.1 IX RU/HA

[. . . ] Operating Instructions OVEN Contents GB English, 1 GB RS Русский, 11 Installation, 2-3 Positioning Electrical connections Data plate Description of the appliance, 4 Overall view Control panel Start-up and use, 5 Starting the oven Cooking modes, 6-7 Cooking modes Practical cooking advice Cooking advice table 7OF 53 C. 1 IX RU/HA The electronic cooking programmer, 8 Precautions and tips, 9 General safety Disposal Respecting and conserving the environment Assistance Maintenance and care, 10 Switching the appliance off Cleaning the appliance Cleaning the oven door Replacing the light bulb Sliding Rack Kit assembly Installation !Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. [. . . ] This helps prevent food from burning on the surface, allowing the heat to penetrate right into the food. Always cook in this mode with the oven door closed. Do not place racks in position 1 and 5 during fanassisted cooking. In the GRILL and GRATIN cooking modes, place the dripping pan in position 1 to collect cooking residues (fat and/or grease). MULTI-COOKING • Use position 2 and 4, placing the food that requires more heat on 2. € Place the dripping pan on the bottom and the rack on top. gRILL • Insert the rack in position 3 or 4. Place the food in the centre of the rack. € We recommend that you set the maximum power level. The top heating element is regulated by a thermostat and may not always be on. PIZZA • For best results when cooking pizza, use the MULTI-COOKING mode. For a crispy crust, do not use the dripping pan (prevents crust from forming by extending cooking time). € If the pizza has a lot of toppings, we recommend adding the mozzarella cheese on top of the pizza halfway through the cooking process. 6 Cooking advice table Cooking time (minutes) 65-75 70-75 70-80 15-20 30-35 15-20 30-35 40-45 60-70 30-35 40-50 20-25 10-15 15-20 20-25 25-30 8-10 6-8 10 10-15 15-20 15-20 7-10 15-20 2-3 55-60 30-35 GB Weight (in kg) 1 1 1 1 1 1 1 1+1 1 1 0. 5 Rack position 3 3 3 3 3 2 and 4 3 2 2 and 4 2 2 2 and 4 2 and 4 2 2 and 4 3 3/4 4 4 4 3 or 4 4 4 4 4 4 2 2 Pre-heating time (min) 15 15 15 15 15 15 10 10 15 10 10 10 10 10 10 15 15 5 5 5 5 5 5 5 5 5 5 5 Recommended temperature 200 200 200 180 180 230 180 180 200 180 170 190 180 170 170 200 220 Max Max Max Max Max Max Max Max Max 200 200 Cooking modes Convection Oven Foods Duck Roast veal or beef Pork roast Biscuits (short pastry) Tarts Pizza (on 2 racks) Lasagne Lamb Roast chicken + potatoes Mackerel Plum cake Cream puffs (on 2 racks) Biscuits (on 2 racks) Sponge cake (on 1 rack) Sponge cake (on 2 racks) Savoury pies Browning food to perfect cooking Soles and cuttlefish Squid and prawn kebabs Cod filet Grilled vegetables Veal steak Cutlets Hamburgers Mackerels Toasts Grilled chicken Cuttlefish Multi-cooking Top oven Grill Gratin 7 The electronic cooking programmer GB DISPLAY Programming cooking !A cooking mode must be selected before programming can take place. cLOCK icon TIMER icon END OF COOKING icon DURATION icon DECREASE TIME button •• •• SET TIME button Programming the cooking duration 1. Press the button several times until the icon and the three digits on the DISPLAY begin to flash. Use the “+” and “-” buttons to set the desired duration; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the value. Wait for 10 seconds or press the to finalise the setting. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. And a time of 1 hour and 15 minutes is programmed. [. . . ] Cleaning the appliance • The stainless-steel or enamel-coated external parts as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and neutral soap. If these stains are difficult to remove, use only specialised products. After cleaning, rinse and dry thoroughly. do not use abrasive powders or corrosive substances. [. . . ]