User manual HOTPOINT 7OF 627C.1

[. . . ] To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority. CAUTION -- INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM Information IN NO EVENT SHALL SELLER BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT. [. . . ] Press <SELECT, (flip the lever towards > or . ) to select the item, and then press ENTER (ENTER). Each time you press SELECT, (flip the lever towards . ), A and B change as follows. Display window A BASS 2 B 34 On A/B BASS OFF/(none) Normal play r BASS 1/ BASS Mega Bass (moderate effect) r BASS 2/ BASS Mega Bass (strong effect) Notes · If the sound becomes distorted when emphasizing bass, turn down the volume. · The Mega Bass function does not affect the sound that is being recorded. Checking the remaining time or the playing position You can check the track name, disc name, etc. during playback. 1 While the recorder is playing, follow steps 1 and 2 of "Checking the remaining time or the recording position" (page 30). On A LapTime The elapsed time of the current track. r 1 Remain The remaining time of the current track. r AllRemain The remaining time after the current location. continued 35 2 Press ENTER (ENTER). The information selected in step 2 appears in A and B. A -- track number, track name1), or disc name2). B -- the information selected in step 2. 1)Appears 2)Appears only when "1 Remain" is selected and the track is labeled. only when "AllRemain" is selected while the recorder is in stop mode, and the disc is labeled. z If you want to check the remaining time or the recording position while recording or in stop mode, see page 30. Protecting your hearing (AVLS) The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your ears. <SELECT, MENU/ ENTER EDIT ENTER >/. 1 2 Press MENU (EDIT for 2 seconds or more), press <SELECT, (flip the lever towards > or . ) repeatedly until "AVLS" flashes in the display, and then press ENTER (ENTER). Note that once a recording has been erased, you cannot retrieve it. Be sure to check the contents of the disc you want to erase. 1 2 While the recorder is stopped, press MENU (EDIT for 2 seconds or more). Press <SELECT, (flip the lever towards > or . ) repeatedly until "EDIT" flashes in the display, and then press ENTER (ENTER). " : Name" flashes in the display. continued 41 3 Press <SELECT, (flip the lever towards > or . ) repeatedly until " : Erase" flashes in the display, and then press ENTER (ENTER). "All Erase?" and "PushENTER" appear alternately in the display. To cancel erasing, press T MARK (T MARK). "TOC Edit" flashes in the display, and all the tracks will be erased. When erasing is complete, "BLANKDISC" appears in the display. 4 Adding a track mark You can add track marks so that the part after the new track mark is counted as a new track. The track numbers will increase as follows. Add a track mark T MARK 1 1 2 2 3 3 4 4 5 Track numbers increase 1 While playing or pausing an MD, press T MARK on the recorder at the point you want to mark. "MARK ON" appears in the display, and a track mark is added. The track number will increase by one. To add track marks while recording Press T MARK on the recorder at the point you want to add a track mark. 42 Notes · You cannot add track marks during synchro-recording. [. . . ] You cannot make copies from a digitally connected source which was itself recorded using digital connection. -- Use analog connection instead (page 20). 61 NO DISC · You tried to play or record with no disc in the recorder. NO SIGNAL · The recorder could not detect digital input signals. -- Make sure that the source is connected firmly (page 12). [. . . ]