User manual HOTPOINT 7OFH G IX RU/HA

[. . . ] See also the manuals provided with your computer for more information about connecting the docking station. the Sony 7OFH G IX RU/HA docking station is designed for Sony personal computers. [. . . ] However, it may not be used with some models. Docking station connector Custom connector (1) USB Type-A connector (3) *1 External display output MONITOR (a) : Analog RGB (mini D-sub 15 pin) (1) DVI-D ( ) : Digital (DVI-D type) (1) LAN connector LAN (10BASE-T/100BASE-TX/1000BASE-T) (1) *1 Power requirement AC adapter *2 Operating temperature 41°F to 95°F (5°C to 35°C) (temperature gradient less than 18°F (10°C)/hour) Operating humidity 20% to 80% (not condensed), provided that humidity is less than 65% at 95°F (35°C) (hygrometer reading of less than 84°F (29°C)) Storage temperature ­4°F to +140°F (­20°C to +60°C) (temperature gradient less than 18°F (10°C)/hour) Storage humidity 10% to 90% (not condensed), provided that humidity is less than 20% at 140°F (60°C) (hygrometer reading of less than 95°F (35°C)) Dimensions Approx. The specifications are the same as those of the computer you are using. for details , refer to the manuals provided with your computer. Use your product only with the AC adapter and power cord supplied with your computer. Design and specifications are subject to change without notice. Use your product only with the AC adapter and power cord supplied with your computer. Moving your computer with the unit installed could cause the unit to fall off, resulting in personal injury, or damage to the unit or your computer. If there are any dust or dirt particles on the docking station connector, your computer may not be able to detect the docking station when it is connected (even if the particles are invisible to the eye). If the connection seems to be poor, remove the AC power adapter and battery, and wipe off the connector and the area around it on both the computer and the unit. Commercial air dusters are also effective for blowing away residual dust and dirt. Be careful not to damage the connectors while cleaning them. Clean the unit with a soft dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish. [. . . ] Clean the unit with a soft dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish. [. . . ]