User manual HOTPOINT AQM8D 49 U

[. . . ]  Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance.  Inside the pack containing this manual, you will also find the guarantee and all the details necessary for installation.  If the appliance is levelled correctly, it will be more stable and much less likely to cause vibrations and noise while it is operating, particularly during the spin cycle.  If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine. [. . . ] Coloured Cottons (3) Jeans Special programmes Baby: heavily soiled delicate colours Mix 30': to refresh lightly soiled garments quickly (not suitable for wool, silk and clothes which require washing by hand) Durable Synthetics Silk: for garments in silk and viscose, lingerie. For all Test Institutes: 1) Test wash cycle in compliance with regulation EN 50229: set wash cycle with a temperature of 60°C. 2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C. 3) Short wash cycle for cottons: set wash cycle with a temperature of 40°C. Super Wash This option offers a high-performance wash due to the greater quantity of water used in the initial phase of the cycle, and due to the increased wash cycle duration, is particularly useful for the removal of stubborn stains. 3 It can be used with or without bleach. If you desire 1 bleaching, insert the extra tray compartment (3) into 2 compartment 1. When pouring in the bleach, be careful not to exceed the “max” level marked on the central pivot (see figure). To bleach laundry without carrying out a full wash cycle, pour the bleach into the extra compartment 3, select the "Rinse" cycle and activate the "Super Wash" option .  It cannot be used in conjunction with , , , , , , , , , , . Wash options indicator lights will flash. To end the cycle press the START/PAUSE button or the “Easy Iron” button. For the Silk wash cycle, the machine will end the cycle while the laundry is soaking and the “Easy Iron” indicator light will flash. To drain the water so that the laundry may be removed, press the START/PAUSE button or the “Easy Iron” button.  It cannot be used in conjunction with , , , , , , , , . Note: If you also want to run the drying cycle, this option is enabled only if combined with level “Iron”. (*) The duration of the wash cycles can be checked on the display. If you select this option, the wash cycle duration will be reduced by 30%-50%, depending on the selected cycle, thereby guaranteeing simultaneous water and energy saving. Use this cycle for lightly soiled garments.  It cannot be used in conjunction with , , , , , , , , , , . Time Saver By selecting this option, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the washer-dryer drum will rotate slowly; the “Easy Iron” and START/PAUSE Easy Iron By selecting this option, the efficiency of the rinse is increased and optimal residual detergent removal is guaranteed. [. . . ] • If the dwelling is on one of the upper floors of a building, there may be problems relating to water drainage, causing the washer-dryer to fill with water and drain continuously. Special anti-draining valves are available in shops and help to prevent this inconvenience. • The wall drainage system is not fitted with a breather pipe. • The wash cycle does not include draining: Some wash cycles require the drain phase to be started manually (see “Wash cycles and options”). [. . . ]