User manual HOTPOINT AQM9D 490 U

[. . . ] Instructions for installation and use  WASHER-DRYER This symbol reminds you to read this instruction manual. EN EN English, 1 I Italiano, 13 PT Português, 25 Contents Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies Technical data NL Nederlands, 37 ES Español, 49 Description of the machine, 4-5 Touch control panel How to run a wash cycle or a drying cycle, 6 AQUALTIS AQM9D 490 U Wash cycles and options, 7 Table of wash cycles Wash options Detergents and laundry, 8 Detergent Preparing the laundry Washing recommendations Load balancing system Precautions and advice, 9 General safety Disposal Opening the porthole door manually Care and maintenance, 10 Cutting off the water and electricity supplies Cleaning the machine Cleaning the detergent dispenser drawer Caring for your appliance drum Cleaning the pump Checking the water inlet hose Trouble shooting, 11 Assistance, 12 1 Installation EN  This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it.  Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. [. . . ] For all Test Institutes: 1) Test wash cycle in compliance with regulation EN 50229: set wash cycle with a temperature of 60°C. 2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C. 3) Short wash cycle for cottons: set wash cycle with a temperature of 40°C. Super Wash This option offers a high-performance wash due to the greater quantity of water used in the initial phase of the cycle, and due to the increased wash cycle duration, is particularly useful for the removal of stubborn stains. 3 It can be used with or without bleach. If you desire 1 bleaching, insert the extra tray compartment (3) into 2 compartment 1. When pouring in the bleach, be careful not to exceed the “max” level marked on the central pivot (see figure). To bleach laundry without carrying out a full wash cycle, pour the bleach into the extra compartment 3, select the "Rinse" cycle and activate the "Super Wash" option .  It cannot be used in conjunction with , , , , , , , , , , . Wash options indicator lights will flash. To end the cycle press the START/PAUSE button or the “Easy Iron” button. For the Silk wash cycle, the machine will end the cycle while the laundry is soaking and the “Easy Iron” indicator light will flash. To drain the water so that the laundry may be removed, press the START/PAUSE button or the “Easy Iron” button.  It cannot be used in conjunction with , , , , , , , , . Note: If you also want to run the drying cycle, this option is enabled only if combined with level “Iron”. (*) The duration of the wash cycles can be checked on the display. If you select this option, the wash cycle duration will be reduced by 30%-50%, depending on the selected cycle, thereby guaranteeing simultaneous water and energy saving. Use this cycle for lightly soiled garments.  It cannot be used in conjunction with , , , , , , , , , , . Time Saver By selecting this option, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the washer-dryer drum will rotate slowly; the “Easy Iron” and START/PAUSE Easy Iron By selecting this option, the efficiency of the rinse is increased and optimal residual detergent removal is guaranteed. It is particularly useful for skin which is sensitive to detergents. [. . . ] Special anti-draining valves are available in shops and help to prevent this inconvenience. • The wall drainage system is not fitted with a breather pipe. • The wash cycle does not include draining: Some wash cycles require the drain phase to be started manually (see “Wash cycles and options”). • The “Easy iron” option is enabled: to complete the wash cycle, press the START/PAUSE button (“Wash cycles and options”). [. . . ]