User manual HOTPOINT ARMXXD 109

[. . . ] Instructions for use WASHER DRYER Contents GB English, 1 GB CIS ÐÓÑÑÊÈÉ, 13 PL Polski, 25 Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Description of the washer dryer, 4-5 Control panel Display How to run a wash cycle or a drying cycle, 6 Wash cycles and functions, 7 Table of wash cycles Wash functions ARMXXD 109 Detergents and laundry, 8 Detergent dispenser drawer Preparing the laundry Special wash cycles Load balancing system Precautions and tips, 9 General safety Disposal Opening the porthole door manually Care and maintenance, 10 Cutting off the water or electricity supply Cleaning the washer dryer Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Troubleshooting, 11 Service, 12 1 Installation GB  This instruction manual should be kept in a safe place for future reference. If the washer dryer is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features.  Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating. [. . . ] 90° 60° 40° 60° 40° 30° 30° 30° 40° - 1000 1000 1000 800 800 800 800 0 800 1 00 0 1 00 0 0 l l l l l l l l l l l l l - l l l l l l l - l l l l l l l l l - l l l l l l l l l l - 7 7 7 3 3 3 1 , 5 1 1 , 5 5 3 1 , 5 7 7 7 3 3 3 1 , 5 1 , 5 1 1 3 - (2 nd press of the button): (3 rd press of the button): heavily soiled whites and resistant colours. The duration of the wash cycles can be checked on the display. syn th etic s (1 s t pres s of th e bu tto n): Syn th etic s (2 nd pres s of th e bu tto n) : lig h tly so iled resis tan t colou rs. M ix 30' (1 s t pre s s o f t h e bu t t o n): to refresh lightly soiled garments quickly (not suitable for wool, silk and clothes which require washing by hand). M ix 15' (2 nd press of the button) : to refresh lightly soiled garments quickly (not suitable for wool, silk and clothes which require washing by hand). D ry ing p ro g ram m e s C otto n dry W oo l dry S pin R in se (1 s t pre s s o f t h e bu t t o n) (2 s t pre s s o f t h e bu t t o n) S yn th etics dry (3 s t pre s s o f t h e bu t t o n) P artial w ash cy cle s (1 s t pre s s o f t h e bu t t o n) (2 nd pre s s o f t h e bu t t o n) - P u m p ou t For all Test Institutes: * Test wash cycle in compliance with regulation EN 50229: set wash cycle with a temperature of 60°C. Wash functions Stain removal This function is particularly useful for the removal of stubborn stains. place extra compartment 4 (supplied) into compartment 1. When pouring in the bleach, be careful not to exceed the "max" level marked on the central pivot (see figure). To run the bleach cycle on its own, pour the bleach 4 into extra compartment 4, set the "Rinse" programme and activate 1 2 the "Stain removal" 3 programme. To bleach during a wash cycle, pour in the detergent and any fabric softener you wish to use, set the desired wash cycle and enable the "Stain removal" function.  The use of extra compartment 4 excludes the “Prewash” function. MAX Easy iron By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the washer dryer will perform slow rotations of the drum; the EASY IRON indicator light will switch on, the START/PAUSE indicator light will flash in an orange colour and the text "END OF CYCLE" will appear on the display. To end the cycle, press the START/PAUSE button or the EASY IRON button. For the Silk/Curtains cycle, the machine will end the cycle while the laundry is soaking; the EASY IRON indicator light will switch on, the START/PAUSE indicator light will flash in an orange colour and the text "STOP WITH WATER" will appear on the display. To drain the water so that the laundry may be removed, press the START/PAUSE button or the EASY IRON button.  It may not be used with the and Drying programmes. , , , “Pump out”  It cannot be used with the Drying programmes. , , , “Pump out” and Extra rinse By selecting this option, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. it is particularly useful for sensitive skin. Mini load This function is recommended for when the load of laundry is equal to half, or less than half, of the maximum recommended load (see Table of wash cycles). [. . . ] The START/PAUSE button has not been pressed. The washer dryer does not take in water (the text "NO WATER, CHECK SUPPLY" appears on the display). The washer dryer continuously takes in and drains water. • The drain hose is not fitted at a height between 65 and 100 cm from the floor (see “Installation”). [. . . ]