User manual HOTPOINT ARTL 125

[. . . ] Anslut inloppsslangen till tvättmaskinen genom att skruva fast den till det avsedda vattenuttaget i den bakre delen uppe till höger (se figur). • Om du tvättar sent på eftermiddagen och natten fram till de tidiga morgontimmarna, hjälper du till att minska elbolagens belastning. tillvalet “Startfördröjning” är till stor hjälp för att organisera tvättcyklerna i denna riktning. • Om du tvättar sent på eftermiddagen och natten fram till de tidiga morgontimmarna, hjälper du till att minska elbolagens belastning. [. . . ] 54 Personalisation Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash ( ). The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. Setting the temperature GB Setting the spin speed Turn the SPIN SPEED knob to set the spin speed for the selected wash cycle. The maximum spin speeds available for each wash cycle are as follows: Wash cycles Maximum spin speed Cottons 1200 rpm Synthetics 800 rpm Wool 600 rpm Silk drain only The spin speed may be lowered, or the spin cycle can be excluded altogether by selecting the symbol . The washing machine will automatically prevent you from selecting a spin speed which is higher than the maximum speed set for each wash cycle. Functions The various wash functions available with this washing machine will help to achieve the desired results, every time. Press the button corresponding to the desired function; 2. The function is enabled when the corresponding indicator light is illuminated. Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the selected wash cycle. Super Wash Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle duration, this function offers a high-performance wash.  This function may not be used in conjunction with wash cycles 5, 6, 7, 11, 12, , , , . Extra rinse By selecting this function, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. it is particularly useful for sensitive skin.  This function may not be used in conjunction with wash cycles 5, 6, , , . Easy iron By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the washing machine will perform slow rotations of the drum. For the 4, 8, 11 wash cycle, the machine will end the cycle while the laundry is soaking, the EASY IRON and START/PAUSE indicator lights will flash (orange) and the RINSE phase will remain lit in a fixed manner. To drain the water so that the laundry may be removed, press the START/PAUSE button or the EASY IRON button.  This function may not be used in conjunction with wash cycles 5, 6, 7, 8, 9, 12, Delay timer , , . This timer delays the start time of the wash cycle by up to 12 hours. Press the button repeatedly until the indicator light corresponding to the desired delay time switches on. [. . . ] a delayed start has been set (see “Personalisation”). The water inlet hose is not connected to the tap. The START/PAUSE button has not been pressed. The washing machine does not take in water (the indicator light for the first wash cycle stage flashes rapidly). [. . . ]