User manual HOTPOINT BWMD 742

[. . . ] Instructions for use WASHING MACHINE Contents Installation, 2-3-4-5 GB English, 1 GB I Italiano, 15 ES Español, 29 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Instructions for the fitter CIS Русский, 43 Description of the washing machine, 6-7 Control panel Display Running a wash cycle, 8 Wash cycles and functions, 9 Table of wash cycles Wash functions BWMD 742 Detergents and laundry, 10 Detergent dispenser drawer Preparing the laundry Special wash cycles Load balancing system Precautions and tips, 11 General safety Disposal Opening the porthole door manually Care and maintenance, 12 Cutting off the water or electricity supply Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Troubleshooting, 13 Service, 14 1 Installation GB !This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features. Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating. [. . . ] The corresponding indicator light will become green, remaining lit in a fixed manner, and the door will be locked (the DOOR LOCKED symbol will be on). During the wash cycle, the name of the phase in progress will appear on the display. To change a wash cycle while it is in progress, pause the washing machine using the START/PAUSE button (the START/ PAUSE indicator light will flash slowly in an orange colour); then select the desired cycle and press the START/PAUSE button again. To open the door while a cycle is in progress, press the START/PAUSE button; if the DOOR LOCKED symbol is switched off the door may be opened. Press the START/PAUSE button again to restart the wash cycle from the point at which it was interrupted. This will be indicated by the text “END OF CYCLE” on the display; when the DOOR LOCKED symbol switches off the door may be opened. Open the door, unload the laundry and switch off the machine. If you wish to cancel a cycle which has already begun, press and hold the button. The cycle will be stopped and the machine will switch off. If the selected function is not compatible with the programmed wash cycle, the indicator light will flash and the function will not be activated. If the selected function is not compatible with another function which has been selected previously, 8 Wash cycles and functions Table of wash cycles Cycle duration 180’ 170’ 95’ 70’ 60’ 30’ 195’ 70’ 80’ 16’ 36’ 2’ Max. (°C) Detergents Prewash Wash Fabric softener Bleach GB Description of the wash cycle Anti Stain 40° Standard Cotton 60° (1) (1st press of the button): heavily soiled whites and 60° delicate colours. Fastwash 60' (1st press of the button): to refresh normal soiled garments quickly (not suitable for wool, silk and clothes which require washing by hand). Fastwash 30' (2nd press of the button): to refresh lightly soiled garments quickly (not suitable for wool, silk and clothes which require washing by hand). M My Cycle: allows for any wash cycle to be stored. anti Allergy Woolmark Platinum (Wool): for wool , cashmere , etc. Delicates Spin (1st press of the button) Rinse (2nd press of the button) Pump out (3rd press of the button) 60° 40° 40° 60° 30° 60° 40° 30° - 1400    1400 (3)  1400 1400 800 800 800                -         - 4 7 7 7 3 3 3 3, 5 3 4 1, 5 1 7 7 7 53 1, 1 - 58 190’ 53 0, 99 82 185’ -            - 44 0, 93 47 110’ 44 0, 57 46 - 1400 800 - 53 0, 81 40 71 0, 15 35 - 1400 800 0 1400 1400 0 - The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected. 1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 60°C (1st press of the button). This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value. 2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 40°C (2nd press of the button). [. . . ] Possible causes / Solutions: • The appliance is not plugged into the socket fully, or is not making contact. € The water inlet hose is not connected to the tap. • The START/PAUSE button has not been pressed. € The drain hose is not fitted at a height between 65 and 100 cm from the floor (see “Installation”). [. . . ]