Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HOTPOINT CS2A 250 H. We hope that this HOTPOINT CS2A 250 H user guide will be useful to you.
Lastmanuals help download the user guide HOTPOINT CS2A 250 H.
Detailed instructions for use are in the User's Guide.
[. . . ] The fast freeze function automatically deactivates after about 50 hours. The exact configuration of the control panel may vary according to the model. BEFORE USING THE APPLIANCE Your new appliance is designed to be used in the household and similar applications such as: - kitchen areas in shops, offices and other working environments - farm houses - by clients in hotels, motels, residences, bed & breakfasts. The product must only be used to store frozen food, to freeze fresh food and to make ice. [. . . ] Observe the expiry date on the packaging. ¢ Always follow the storage instructions on frozen food packages. note: ⢠Eat fully or partially defrosted foods immediately. Do not refreeze unless the food is cooked after it has thawed. ¢ In case of a prolonged power failure: Do not open the appliance door, except to place ice packs (if provided) over the frozen foods on the right and left side of the appliance. This will slow down the rise in temperature. PRECAUTIONS AND SUGGESTIONS ⢠During installation, make sure the appliance does not damage the power cable. ¢ Do not store glass containers with liquids inside the product as they may break. ¢ Do not eat ice cubes or ice lollies immediately after taking them out of the appliance as they may cause cold burns. ¢ Before carrying out any maintenance or cleaning, always unplug the appliance or disconnect the power supply. ¢ Do not install the appliance in places exposed to direct sunlight or near heat sources in order to avoid increasing power consumption. For this reason the side and front walls of the product may become hot while the product is running. This is entirely normal and also reduces the risk of condensation forming in particularly critical environmental conditions (see paragraph âTroubleshooting guideâ). APPLIANCE DEFROSTING The appliance should be defrosted when the thickness of ice on the walls reaches 5-6 mm. ¢ Disconnect the appliance from the power supply. ¢ Remove food from the appliance and put it in a very cool place or a thermally insulated bag. ¢ Use the separator (depending on model) inside the product as a recipient for any remaining water, (D) as shown in fig. If there is no separator, use a shallow container. ¢ Defrosting can be sped up by using a spatula to detach the frost from the appliance walls. ¢ Remove the frost from the bottom of the appliance. ¢ In order to avoid permanent damage to the appliance interior, do not use pointed or sharp metal instruments to remove the ice. ¢ Do not use abrasive products or heat up the interior artificially. [. . . ] The green LED (if provided) is off and the appliance is working. ¢ The green LED is not working. Contact the After Sales Service for a replacement. ¢ Have hot foods been put in the appliance? [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HOTPOINT CS2A 250 H
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HOTPOINT CS2A 250 H will begin.
