User manual HOTPOINT ECOTF 1051

[. . . ] Instructions for use WASHING MACHINE Contents GB English, 1 GB HU Magyar, 13 UK Українська, 25 Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Description of the washing machine and starting a wash cycle, 4-5 Control panel Indicator lights How to open and shut the drum Starting a wash cycle Wash cycles, 6 Table of wash cycles ECOTF 1051 Personalisation, 7 Setting the temperature Setting the spin speed Functions Detergents and laundry, 8 Detergent dispenser drawer Bleach cycle Preparing the laundry Garments requiring special care Load balancing system Precautions and tips, 9 General safety Disposal Saving energy and respecting the environment Care and maintenance, 10 Cutting off the water or electricity supply Cleaning the washing machine Caring for your appliance door and drum Cleaning the pump Checking the water inlet hose How to clean the detergent dispenser Troubleshooting, 11 Service, 12 1 Installation GB !Keep this instruction manual in a safe place for future reference. Should the appliance be sold, transferred or moved, make sure the instruction manual accompanies the washing machine to inform the new owner as to its operation and features. electric and water connections Connecting the water inlet hose ! [. . . ] Functions The various wash functions available with this washing machine will help to achieve the desired results, every time. Press the button corresponding to the desired function; 2. The function is enabled when the corresponding indicator light is illuminated. Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the selected wash cycle. Delay timer To set a delayed start for the selected wash cycle, press the button repeatedly until the desired delay time is displayed (this may be between 1 hour and 24 hours). To disable the function press the button until the text is displayed. Once you have pressed the START/PAUSE button, the delay time may only be decreased if you wish to modify it. This option is enabled with all programmes. Super Wash Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle duration, this function offers a high-performance wash. This function may not be used in conjunction with wash cycles 5, 6, 9, 10, 11, 12, 13, , , . Extra rinse By selecting this function, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. This function may not be used in conjunction with wash cycles 5, 13, , . Easy iron By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the washing machine will perform slow rotations of the drum. For the 9 wash cycle, the machine will end the cycle while the laundry is soaking, the EASY IRON and START/PAUSE indicator lights will flash (orange) and the RINSE phase will remain lit in a fixed manner. To drain the water so that the laundry may be removed, press the START/PAUSE button or the EASY IRON button. This function may not be used in conjunction with wash cycles 5, 6, 7, 10, 11, 12, 13, , . 7 Detergents and laundry GB Detergent dispenser drawer Good washing results also depend on the correct dose of detergent: adding too much detergent won’t necessarily make for a more efficient wash, and may in fact cause build up on the interior of your appliance and even pollute the environment. Preparing the laundry • Divide the laundry according to: - the type of fabric/the symbol on the label - the colours: separate coloured garments from whites. • Empty all garment pockets and check the buttons. € Do not exceed the listed values, which refer to the weight of the laundry when dry: Durable fabrics: max. Use powder detergent for white cotton garments, for prewashing, and for washing at temperatures over 60°C. [. . . ] Possible causes / Solutions: • The appliance is not plugged into the socket fully, or is not making contact. € The water inlet hose is not connected to the tap. • The START/PAUSE button has not been pressed. € The drain hose is not fitted at a height between 65 and 100 cm from the floor (see “Installation”). [. . . ]