User manual HOTPOINT F48 101 P.1 IX

[. . . ] 14 Operating Instructions OVEN Contents IT Italiano, 1 /* GB English, 15 FR Français, 29 Installation, 16-17 Positioning Electrical connection Overall view Control panel Description of the appliance, 18 ES Espanol, 43 PT Português, 57 Start-up and use, 19-20 Control panel lock DEMO mode Setting the clock Setting the timer Starting the oven Data plate F48 F48 F48 F48 1012. 1 IX Cooking modes, 21-24 Manual cooking modes Automatic cooking modes Programming cooking Practical cooking advice Cooking advice table Precautions and tips, 25 General safety Disposal Respecting and conserving the environment Care and maintenance, 26-27 Switching the appliance off Cleaning the appliance Replacing the light bulb Assembling the sliding rack kit Automatic cleaning with the FAST CLEAN function Assistance, 28 Installation /*  Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance.  Please keep these operating instructions for future reference. [. . . ] Dilute yeast in lukewarm water (approximately 35 degrees). • Make a small well in the mound of flour. • Knead dough by stretching and folding it over itself with the palm of your hand for 10 minutes until it has a uniform consistency and is not too sticky. • Ball and cover the dough with plastic wrap and leave it to leaven at room temperature for 1 – 1 ½ hours (until it has doubled in size). • Cut the dough into equal sized loaves. • Place them in the dripping pan on oven paper. • Remember to pour 100 ml of cold water into the baking tray in position 5. For cleaning purposes, we recommend the use of water and vinegar. • Place the loaves inside the oven while it is still cold. • Start the • Once baked, leave the loaves on one of the grill racks until they have cooled completely. 22 Programming cooking  A cooking mode must be selected before programming can take place. Programming the duration To set the duration of a manual cooking mode 1. Press the button several times until the icon and the first digit on the TIME display flash. Press the "+" and "-" buttons to adjust the hour value. Press the digits on the TIME display begin to flash. Press the "+" and "-" buttons to adjust the minute value. And a time of 1 hour and 15 minutes is programmed. Programming delayed cooking  A cooking duration must be selected before delayed programming can take place. Follow steps 1 to 5 to set the duration as detailed above. Then press the the two digits on the TIME display flash. Press the "+" and "-" buttons to adjust the hour value. Press the digits on the TIME display begin to flash. [. . . ] Safety devices • The door is locked automatically as soon as the temperature exceeds a certain value. Should a malfunction occur , the heating elements will switch off. • Once the oven door has been locked, you cannot change the duration and end time settings.  Programming is possible only after selecting the FAST CLEAN mode. [. . . ]