User manual HOTPOINT FH 83 IX AG

[. . . ] Operating Instructions OVEN Contents GB English, 1 GB ES Espanol, 12 PT Portuges, 23 Installation, 2-3 Positioning Electrical connections Description of the appliance, 4 Overall view Control panel Start-up and use, 5 Starting the oven Using the cooking timer Data plate The electronic cooking programmer, 6 FH 83 AG FH 83 IX AG Cooking modes Practical cooking advice Cooking advice table Cooking modes, 7-9 Precautions and tips, 10 General safety Disposal Respecting and conserving the environment Assistance Maintenance and care, 11 Switching the appliance off Cleaning the appliance Cleaning the oven door Replacing the light bulb Installation GB  Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance.  Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. [. . . ] Wait for 10 seconds or press the button again to finalise the setting. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. Programming has been set when the and buttons are illuminated. The DISPLAY shows the cooking end time and the cooking duration alternately. Cancelling a programme To cancel a programme: • press the button until the icon corresponding to the setting you wish to cancel and the digits on the display are no longer flashing. Press the “-” button until the digits 00:00 appear on the display. • Press and hold the “+” and “-” buttons; this will cancel all the settings selected previously, including timer settings. INCREASE TIME button Setting the clock  The clock may be set when the oven is switched off or when it is switched on, provided that a the end time of a cooking cycle has not been programmed previously. After the appliance has been connected to the mains, or after a blackout, the icon and the four numerical digits on the DISPLAY will begin to flash. Press the icon and the four digits on the display begin to flash. Use the “+” and “-” buttons to adjust the time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the desired value. Wait for 10 seconds or press the to finalise the setting. Button again Setting the timer  This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed. Press the button several times until the icon and the three digits on the display begin to flash. Use the “+” and “-” buttons to set the desired time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the value. Wait for 10 seconds or press the button again to finalise the setting. The display will then show the time as it counts down. When this period of time has elapsed the buzzer will be activated. A temperature value can be set for all cooking modes between 60°C and Max, except for • BARBECUE (recommended: set only to MAX power level); • GRATIN (recommended: do not exceed 200°C). LEAVENING mode The oven reaches and maintains a temperature of 40°C irrespective of the position of the THERMOSTAT knob. This mode is ideal for leavening dough made with yeast. TRADITIONAL OVEN mode Both the top and bottom heating elements will come on. [. . . ] ) • serial number (S/N) This information is found on the data plate located on the appliance and/or on the packaging. 10 Maintenance and care Switching the appliance off Cleaning the appliance Disconnect your appliance from the electricity supply before carrying out any work on it. • The stainless-steel or enamel-coated external parts as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and neutral soap. If these stains are difficult to remove, use only specialised products. [. . . ]