User manual HOTPOINT FMF 923K EU.C

[. . . ] If the floor is not perfectly level, compensate for any unevenness by tightening or loosening the adjustable front feet (see figure); the angle of inclination, measured in relation to the worktop, must not exceed 2°. Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating. If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine. Remove the washing machine from its packaging. [. . . ] Consumersshould contact their local authority or retailer for information concerning the correct disposal of their old appliance 4. Pull outwards using the tab as indicated in the figure, until the plastic tie-rod is freed from its stop position; pull downwards and open the door at the same time. Reposition the panel, making sure the hooks are securely in place before you push it onto the appliance. 5 Description of the washing machine GB Control panel TEMPERATURE button CHILD LOCK button CLEANING ACTION button ON/OFF button DISPLAY Detergent dispenser drawer WASH CYCLE SELECTOR KNOB SPIN OPTION START/PAUSE button button and indicator light button and indicator light DELAY TIMER button Detergent dispenser drawer: used to dispense detergents and washing additives ( see “Detergents and laundry”). ON/OFF button: press this briefly to switch the machine on or off. The START/PAUSE indicator light which flashes slowly in a green colour shows that the machine is switched on. To switch off the washing machine during the wash cycle, press and hold the button for approximately 3 seconds; if the button is pressed briefly or accidentally the machine will not switch off. If the machine is switched off during a wash cycle, this wash cycle will be cancelled. WASH CYCLE SELECTOR KNOB: used to set the desired wash cycle (see “Table of programmes and wash cycles”). oPTION button and indicator light: press to select the available options. The indicator light corresponding to the selected option will remain lit. When pouring in the bleach, be careful not to exceed the “max” level marked on the central pivot (see figure pag. For lightly-soiled garments or a more delicate treatment of the fabrics, press button until the “Delicate” level is reached. The cycle will reduce drum rotation to ensure washing results that are perfect for delicate garments. € Press the button to enable the option; the indicator light corresponding to the button will switch on. € Press the button again to disable the option; the indicator light will switch off. If the selected option is not compatible with the set wash cycle, the indicator light will flash and the option will not be activated. The options may affect the recommended load value and/or the duration of the cycle. The corresponding indicator light will turn green, remaining lit in a fixed manner, and the door will be locked (the DOOR LOCKED symbol will be lit). To change a wash cycle while it is in progress, pause the washing machine using the START/PAUSE button (the START/PAUSE indicator light will flash slowly in an amber colour); then select the desired cycle and press the START/PAUSE button again. To open the door while a cycle is in progress, press the START/PAUSE button; if the DOOR LOCKED symbol is switched off the door may be opened. Press the START/PAUSE button again to restart the wash cycle from the point at which it was interrupted. [. . . ] If, after several attempts, the load is not balanced correctly, the machine spins at a reduced spin speed. If the load is excessively unbalanced, the washing machine performs the distribution process instead of spinning. To encourage improved load distribution and balance, we recommend small and large garments are mixed in the load. 10 Troubleshooting Your washing machine could occasionally fail to work. [. . . ]