User manual HOTPOINT FZ 101 GP.1 IX/HA

[. . . ] 14 Operating Instructions OVEN Contents IT Italiano, 1 GB GB English, 15 FR Français, 29 Installation, 16-17 Positioning Electrical connection Data plate Overall view Control panel ES Espanol, 43 PT Português, 57 Description of the appliance, 18 Start-up and use, 19-20 Control panel lock DEMO mode Setting the clock Setting the timer Starting the oven FZ 101 P. 1 IX/HA Cooking modes, 21-24 Manual cooking modes Automatic cooking modes Programming cooking Practical cooking advice Cooking advice table Precautions and tips, 25 General safety Disposal Respecting and conserving the environment Care and maintenance, 26-27 Switching the appliance off Cleaning the appliance Cleaning the oven door Replacing the light bulb Assembling the sliding rack kit Automatic cleaning with the FAST CLEAN function Assistance, 28 Installation GB  Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance.  Please keep these operating instructions for future reference. [. . . ] For cleaning purposes, we recommend the use of water and vinegar. • Place the loaves inside the oven while it is still cold. • Once baked, leave the loaves on one of the grill racks until they have cooled completely. 22 Programming cooking  A cooking mode must be selected before programming can take place. Programming the duration To set the duration of a manual cooking mode 1. Press the button several times until the icon and the first digit on the TIME display flash. Press the "+" and "-" buttons to adjust the hour value. Press the digits on the TIME display begin to flash. Press the "+" and "-" buttons to adjust the minute value. And a time of 1 hour and 15 minutes is programmed. Programming delayed cooking  A cooking duration must be selected before delayed programming can take place. Follow steps 1 to 5 to set the duration as detailed above. Then press the button until the icon and the two digits on the TIME display flash. Press the "+" and "-" buttons to adjust the hour value. Press the digits on the TIME display begin to flash. Press the "+" and "-" buttons to adjust the minute value. And a time of 1 hour and 15 minutes is programmed and the end time is set to 12:30. And Programming has been set when the buttons are illuminated. The TIME display shows the cooking end time and the cooking duration alternately. to cancel a programmed procedure press the “START/STOP” button. : Practical cooking advice  Do not place racks in position 1 and 5 during fanassisted cooking. This is because excessive direct heat can burn temperature sensitive foods. [. . . ] Press the "+" and "-" XXX buttons to adjust the minute value. And the Economy (ECO) FAST CLEAN mode level has been selected: default set time 1 hour. The TIME display shows the FAST CLEAN end time and duration alternately. to cancel a programmed procedure press the “START/ STOP” button. [. . . ]