User manual HOTPOINT FZ 103 P.1 GIX

[. . . ] 13 Operating Instructions OVEN Contents IT Italiano, 1 GB GB English, 14 FR Français, 27 Installation, 15-16 Positioning Electrical connection Data plate Overall view Control panel ES Espanol, 40 PT Português, 53 Description of the appliance, 17 Start-up and use, 18 Control panel lock DEMO mode Setting the clock and timer Starting the oven Cooking modes, 19-22 FZ 103 P. 1 G IX Manual cooking modes Automatic cooking modes Programming the cooking mode Practical cooking advice Cooking advice table Precautions and tips, 23 General safety Disposal Respecting and conserving the environment Care and maintenance, 24-25 Switching the appliance off Cleaning the appliance Cleaning the oven door Replacing the light bulb Automatic cleaning with the FAST CLEAN function Assistance, 26 Installation  Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance.  Please keep these operating instructions for future reference. [. . . ] Place the bowl inside and leave the dough to rise for approximately 1 hour (the dough should double in volume). • Cut the dough into equal sized loaves. • Place them in the dripping pan on oven paper. • Remember to pour 100 ml of cold water into the baking tray in position 5. For cleaning purposes, we recommend the use of water and vinegar. • Place the loaves inside the oven while it is still cold. • Once baked, leave the loaves on one of the grill racks until they have cooled completely. 20 Programming cooking  A cooking mode must be selected before programming can take place. Programming the duration ; button; the button and the 1. Press the numbers on the TIME display will flash. To set the duration, press buttons "+" and "-"; press and hold to scroll the numbers quicker and make setting easier. Once the desired duration setting is reached, wait 10 seconds for the selection to be memorized, or again to fix the setting. When the set time has elapsed, END appears on the TEMPERATURE display and a buzzer sounds. And a time of 1 hour and 15 minutes is programmed. Press the button and repeat steps 1 to 3 as described for the duration setting. Then press the button and set the end of cooking time by pressing buttons "+" and "-"; press and hold to scroll the numbers quicker and make setting easier. Once the end of cooking time is reached, wait 10 seconds for the selection to be memorized, or press the button again to fix the setting. Press the “START” button to confirm the programming process. When the selected time has elapsed, END appears on the TEMPERATURE display and a buzzer sounds. And a time of 1 hour and 15 minutes is programmed and the end time is set to 12:30. The and buttons will flash signalling that the programmed mode has been set. After programming, in the time before cooking starts, the TIME display indicates the duration and end of cooking time alternately. [. . . ] Safety devices • The door is locked automatically as soon as the temperature exceeds a certain value. Should a malfunction occur , the heating elements will switch off. • Once the oven door has been locked, you cannot change the duration and end time settings.  Programming is possible only after selecting the FAST CLEAN mode. [. . . ]