User manual HOTPOINT FZ 990 C.1 IX/HA

[. . . ] 12 Operating Instructions OVEN Contents IT Italiano, 1 GB GB English, 13 FR Français, 25 Installation, 14-15 Positioning Electrical connection Technical data ES Espanol, 37 PT Portuges, 49 Description of the appliance, 16 Overall view Control panel Display Start-up and use, 17 Setting the clock Setting the timer Starting the oven Cooking modes, 18-20 FZ 990 C. 1 IX/HA Cooking modes Programming cooking Practical cooking advice Cooking advice table Precautions and tips, 21 General safety Disposal Respecting and conserving the environment Care and maintenance, 22-23 Switching the appliance off Cleaning the appliance Cleaning the oven door Replacing the light bulb Assembling the sliding rack kit Assistance, 24 Installation GB !Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance. [. . . ] BARBECUE mode By turning the THERMOSTAT knob, the different power levels which may be set will appear on the display; these range between 50% and 100%. The high and direct temperature of the grill is recommended for food which requires a high surface temperature. Always cook in this mode with the oven door closed. GRATIN mode This combination of features increases the effectiveness of the unidirectional thermal radiation provided by the heating elements through forced circulation of the air throughout the oven. This helps prevent food from burning on the surface and allows the heat to penetrate right into the food. Always cook in this mode with the oven door closed. PIZZA OVEN mode This combination heats the oven rapidly by producing a considerable amount of heat, particularly from the element at the bottom. If you use more than one rack at a time, switch the position of the dishes halfway through the cooking process. BAKING mode This mode is ideal for baking temperature sensitive foods (such as cakes, which need to rise) and for the preparation of “bitesize pastries” on 3 shelves simultaneously. FAST COOKING mode Preheating is not necessary for this cooking mode. This mode is particularly suitable for cooking prepacked food quickly (frozen or pre-cooked). The best results are achieved using one cooking rack only. PROVING mode The oven reaches and maintains a temperature of 40°C irrespective of the position of the THERMOSTAT knob. This mode is ideal for leavening dough made with yeast. Place the rotisserie support in position 3 and insert the spit in the hole provided on the back panel of the oven. Start the rotisserie using the SELECTOR knob to select mode or . 18 Programming cooking  A cooking mode must be selected before programming can take place. Press the button several times until the icon and the three digits on the DISPLAY begin to flash. Turn the TIMER KNOB towards “+” and “-” to adjust the duration. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. And a time of 1 hour and 15 minutes is programmed. Setting the end time for a cooking mode  A cooking duration must be set before the end cooking time can be scheduled. [. . . ] Inspecting the seals Check the door seals around the oven regularly. If the seals are damaged, please contact your nearest After-sales Service Centre (see Assistance). We recommend that the oven is not used until the seals have been replaced. Replacing the light bulb To replace the oven light bulb: Cleaning the oven door Clean the glass part of the oven door using a sponge and a non-abrasive cleaning product, then dry thoroughly with a soft cloth. [. . . ]