User manual HOTPOINT HB 0601 DSL0

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HOTPOINT HB 0601 DSL0. We hope that this HOTPOINT HB 0601 DSL0 user guide will be useful to you.

Lastmanuals help download the user guide HOTPOINT HB 0601 DSL0.


Mode d'emploi HOTPOINT HB 0601 DSL0
Download
Manual abstract: user guide HOTPOINT HB 0601 DSL0

Detailed instructions for use are in the User's Guide.

[. . . ] A scraper may be used but must be used only when the blender is not running. The appliance cannot be used for chopping ice or blending hard and dry substance, otherwise the blade could be blunted. O reduce the risk of T 10 injury, never place cutting blade on base without first putting bowl properly in place. [. . . ] To start operating by pressing and hold the TURBO button is possible as well:, the appliance will operate at the highest speed all the time. Note: When operating by the TURBO button, the speed will not change even if you operate the speed control dial. Stop the blender by releasing the START or the TURBO button. Blades and discs are very sharp: handle with care. USING THE CHOPPER ATTACHMENT (ONLY ON SOME MODELS) (B) Caution: Maximum operation duration per time cannot exceed 1 minute, and a 3 minutes rest time must be observed after two consecutive cycles. Place the chopper bowl on a clean, level surface. Assemble the stainless chopping blade into the chopper bowl, as shown in Fig. Note: Remove the bone of the meat, cut small pieces, then place the meat into the bowl. Assembly the lid onto the chopper bowl Insert the motor unit into the hole of the chopper lid, and turn in clockwise direction to lock. Then press and hold the START button to operate. At the same time you can select desired speed setting by dialing the speed control dial and the speed will increase gradually when you dial the speed control dial from right to left. To start operating by pressing and hold the TURBO button is possible as well:, the appliance will operate at the highest speed all the time. 11 en it Note: When operating by the TURBO button, the speed will not change even if you operate the speed control dial. Stop the appliance by releasing the START or the TURBO button. Unplug the power outlet firstly, then remove the motor unit from the chopper lid by turning it anticlockwise. Open the chopper lid and remove the chopped food. [. . . ] To start operating by pressing and hold the TURBO button is possible as well:, the appliance will operate at the highest speed all the time. TIP Between processing tasks, hold the hand-held blender in a cup half filled with water and turn on for a few seconds. ENVIRONMENT DISPOSAL FRIENDLY Note: When operating by the TURBO button, the speed will not change even if you operate the speed control dial. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HOTPOINT HB 0601 DSL0

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HOTPOINT HB 0601 DSL0 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag