User manual HOTPOINT HLB 6.8 LT X

[. . . ] If the installation instruction manual for the gas cooking appliance specifies a greater distance, this measurement should be taken into account. € The cooker hood comes with anchor plugs which are suitable for use with most walls/ceilings. However, you must contact a qualified technician to check the suitability of the materials in relation to the type of wall/ ceiling, which must be strong enough to support the weight of the unit. Do not hook the unit up to its electrical power supply until the installation has been completed. [. . . ] T3 Speed 2 When the button is pressed the hood switches from the previous status to speed 2. T4 Speed 3 When the button is pressed the hood switches from the previous status to speed 3. T5 Booster When the button is pressed the hood switches from the previous status to intense speed. The setting is limited by time; when the time elapses the hood goes back to the speed set previously; when a speed button is pressed )T2, T3 or T4), the selected speed is set as you leave the booster mode. T6 Timer By pressing T6 once, a timer setting can be associated to each speed, after which the hood turns OFF automatically. The timer can be set for manual speeds only and not for the booster. T7 Antigrease and odour filter signal The antigrease )A) and odour )B( filters need cleaning/ replacing after a certain number of hours of use )the latter for filtering hoods only(. The time for cleaning/replacement is signalled by the flashing of the coloured LED associated to the filter (white for antigrease filters, red for odour filter(. The LED is turned off by pressing the T7 button after cleaning/replacing the filters. T8 lights ON/OFF It turns the work lights of the hood on and off. Hood configuration The configuration menu is accessed with the product off by pressing T5 and T6 for 6 seconds. Press the T6 button to decrease the previously set value by 5 minutes. T7 Timer “+” When the button is pressed for the first time, the timer is set to 5 minutes; this value is increased by 5 additional minutes every time the button is pressed after that. T8 lights ON/OFF It turns the work lights of the hood on and off. GB I1 D1 D2 I5 Models with Touch control glass + display (high) )Only available in certain models) I2 D1: DGT Speed D2: Assembly of 2 DGT Time I1: Grease Filter Indicator I2: Carbon Filter Indicator I4: Menu Indicator I5: Timer Indicator I4 T1 T2 T3 T4 T5 T6 T7 T8 T1 motor ON/OFF When the button is pressed with the hood off, the first speed is set. When the button is pressed during operation, the hood switches OFF. T2 Speed – When the button is pressed the hood switches to the previous speed. T3 Speed + When the button is pressed the hood switches to the next speed. If the hood is off, speed 1 is set when pressing this button. T4 Booster When the button is pressed, the hood switches from the previous status to the intensive speed; the letter “b” will flash slowly on the display. The setting has a limited timeframe; when the time elapses the hood goes back to the speed set previously; when a speed button is pressed )T2, T3 or T4), the selected speed is set as you leave the booster mode. Antigrease and odour filter signal The antigrease (A( and odour (B( filters need cleaning/ replacing after a certain number of hours of use )the latter for filtering hoods only(. [. . . ] servicing the charcoal filter (B) The charcoal filter retains unpleasant cooking odours. The filter saturates after a variable time, depending on the type of cooking and how often the grease filter is cleaned. The cartridge must be replaced at least once every twenty months. This filter can NOT be washed or regenerated Disassembly: Remove the activated-carbon filter by B pressing the two front levers which secure it to the hood. [. . . ]