User manual HOTPOINT KIA 641 B S

[. . . ] € WARNING: The appliance and its accessible parts become hot during use. € Care should be taken to avoid touching heating elements. € Children less than 8 years of age shall be kept away unless continuously supervised. € This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. [. . . ] + - Booster function* The booster function for some of the cooking zones may be used to shorten heating-up times. The indicator light directly by pressing the above the button will illuminate. This function boosts the power to 2000 W or 3000 W, depending on the size of the relevant cooking zone. The booster stops automatically after 4 minutes. While the booster for one of the cooking zones is active, the corresponding front or rear cooking zone will operate at a reduced power level (e. If the booster for the rear left-hand hotplate has been activated, the power level of the front left-hand hotplate will be reduced). For further information, please refer to the Technical description of the models. All the cooking zones may be programmed simultaneously, for a duration between 1 and 99 minutes. Select the cooking zone using the corresponding selector button. Adjust the power level of the cooking zone. The indicator light corresponding to the selected zone will start flashing. Set the cooking duration using the buttons. Set the desired duration using the buttons. - + and GB - + and button or automatic 5. Confirm by pressing the selection occurs after 10 seconds. The timer begins counting down immediately. - + and GB - + and button or automatic 5. Repeat the above procedure for each hotplate you wish to programme. Using multiple programmes and the display If one or more hotplates are programmed, the display will show the data for the hotplate with the least time remaining, and the light corresponding to the position of the hotplate will flash. The lights corresponding to the other hotplates programmed will be switched on. To visualise the time remaining for the other programmed button repeatedly: the time hotplates, press the remaining for each hotplate will be shown sequentially in a clockwise order, starting from the front left hotplate. Changing the programme button repeatedly until the duration you 1. [. . . ] 18 Care and maintenance Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. € Once it is clean, the hob may be treated with a special protective maintenance product: the invisible film left by this product protects the surface from drips during cooking. This maintenance task should be carried out while the appliance is warm (not hot) or cold. € Always remember to rinse the appliance well with clean water and dry it thoroughly: residues can become encrusted during subsequent cooking processes. [. . . ]