User manual HOTPOINT KIS 631 T Z S

[. . . ] € WARNING: The appliance and its accessible parts become hot during use. € Care should be taken to avoid touching heating elements. € Children less than 8 years of age shall be kept away unless continuously supervised. € This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. [. . . ] The fan functions at maximum power when the large induction element is at maximum power or when the booster function is on; in all other cases, it works at average power depending on the temperature detected. Furthermore, the fan may continue to work even after switching the hob off, if the temperature detected is high. The types of noise listed above are due to induction technology and are not necessarily operational faults. If the or button is pressed for an extended period of time, the display scrolls quickly though the timer minutes. Switching off the cooking zones To switch off the hotplate, press the ( ) button, moving the slider towards the left to return to level 0, or press the OFF button on the slider control directly. The first time the slider is pressed, a short beep will sound to acknowledge the touch. If - and only if - the power level is adjusted, another short beep will sound when the slider is released. The hotplate selection LEDs light up for the power adjustment period (10 seconds), during which the slidercan influence the selected hotplate. All the cooking zones may be programmed simultaneously, for a duration between 1 and 99 minutes. Select the cooking zone using the corresponding selector button. Adjust the power level of the cooking zone. Press the light corresponding to the selected zone will start flashing. Set the cooking duration using the buttons. - + Switching on the hob To switch the hob on, press and hold the approximately one second. Confirm by pressing the button or automatic selection occurs after 10 seconds. The timer begins counting down immediately. Repeat the above procedure for each hotplate you wish to programme. Using multiple programmes and the display If one or more hotplates are programmed, the display will show the data for the hotplate with the least time remaining, and the light corresponding to the position of the hotplate will flash. The lights corresponding to the other hotplates programmed will be switched on. To visualise the time remaining for the other programmed button repeatedly: the time hotplates, press the remaining for each hotplate will be shown sequentially in a clockwise order, starting from the front left hotplate. Changing the programme button repeatedly until the duration you 1. Use the buttons to set the new duration. [. . . ] Stainless steel frame (only in models with outer frame) Stainless steel can be marked by hard water which has been left on the surface for a long time, or by cleaning products containing phosphorus. After cleaning, it is advisable to rinse the surface well and dry it thoroughly. If water is spilt on the surface, dry it quickly and thoroughly. Some hobs have an aluminium frame which is similar to stainless steel. [. . . ]