User manual HOTPOINT KOT 7424IO

[. . . ] 10 Operating Instructions HOB Contents IT Italiano, 1 GB GB English, 11 FR Français, 21 Installation, 12-14 Positioning Connecting the hob Disposal NL ES PT Portuges, 51 Description of the appliance, 15-16 Control panel Cooking zone description Turning on the hob Turning off the hob The booster Nederlands, 31 Espanol, 41 Start-up and use, 17 The safety devices, 18 KBT 8424 KBT 8424 KOT 7424 KBT 7124 KBT 6114 KBT 6114 KBT 6004 KBT 6323 KBT 6003 KBT 6013 KBT 6124 KBT 6124 KBT 6124 KBT 6104 IDO/HA IDO IX 400/HA IO/HA ID/HA ID/HA ID-C/HA I/HA IO/HA I/HA ID/HA ID/HA ID 400/HA ID IX 400/HA I CL/HA Pan recognition What cookware to use Acoustic signal Safety cut out Overheating protection device Precautions and tips, 19 Practical advice on using the appliance General safety Care and maintenance, 20 Switching the appliance off Cleaning the appliance Disassembling the hob Installation GB !Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance. Please keep these operating instructions for future reference. [. . . ] Unlocked To access the setting of a cooking zone again, select the zone by pressing the corresponding control key. Cooking time programming KBT 7124 ID/HA - KBT 6114 ID/HA KBT 6124 ID 400/HA - KBT 6124 ID/HA KBT 6013 ID/HA - KBT 6104 I CL/HA: you may programme a single cooking zone (as you wish) for a maximum cooking time of 99 minutes. KBT8424 IDO 400/HA - KBT8424 IDO/HA KOT7424 IO 400/HA - KOT7424 IO/HA KBT6323 IO/HA: you may programme all the cooking zones simultaneously for a maximum cooking time of 99 minutes. Proceed as follows: • select the cooking zone by pressing the corresponding control key, • set the desired heating power using the “+” and “” keys, • press the programming key , • set the desired cooking time using the “+” and “-” keys, • confirm the programming by pressing the key again. The end of programmed cooking is signalled by a beep (one minute long) and the cooking zone is turned off. GB Turning on the hob Press key for 3 seconds to turn the hob on. Cooking zone control Each cooking zone is operated by a control key and by a power adjustment set (+ and -). 0 0 Turning on a cooking zone • To turn a cooking zone on, press the corresponding control key and set the desired heating power (from 0 to 9) using the “+” and “-” keys. • To set the maximum power directly (9), press key “-” briefly. Turning off the hob Press the key; the appliance has been turned off. If you have locked the hob controls (see paragraph below), the same will still be locked when you turn the hob back on. Unlock the controls in order to operate the cooking zones. The booster is only fitted on hobs KBT8424 IDO 400/HA - KBT8424 IDO/HA KOT7424 IO 400/HA - KOT7424 IO/HA KBT 7124 ID/HA - KBT6114 ID/HA - KBT6323 IO/HA KBT 6013 ID/HA - KBT 6124 ID 400/HA KBT 6124 ID/HA - KBT 6104 I CL/HA. To speed up the rise in temperature of the cooking zones (see cooking zone table on the previous page), press the key. The booster P function comes to an automatic stop after 4 minutes. Cast iron, enamelled steel or special induction stainless steel saucepans are ideal. copper , ceramic , earthenware , glass , terracotta , aluminium and non magnetic stainless steel cookware is incompatible with induction cooking. The easiest way to find out whether the pan is suitable is with a magnet. If the magnet is attracted by the pan bottom and stays “stuck” to the same, the pan is made of ferromagnetic material and can be used on your induction hob. We recommend you use pans with a very flat and thick bottom and avoid at all costs all cookware with irregular rough bases which could scratch the glass surface. SUITABLE UNSUITABLE Maximum duration of operation 10 hours 5 hours 4 hours 3 hours 2 hours 1 hour Overheating protection device Should your appliance’s electronic components overheat, the hob will turn off automatically and “a” will come up on the power level display. The letter will disappear as soon as the temperature drops back down to an acceptable level. [. . . ] In this respect, we can only guarantee our own product conformity. Please consult the pacemaker manufacturer or your doctor concerning its conformity or any possible incompatibility. GB 19 Care and maintenance GB Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. Stainless steel frame * Stainless steel can be marked by hard water which has been left on the surface for a long time, or by cleaning products containing phosphorus. [. . . ]