User manual HOTPOINT LBF 52 TK/HA.R

[. . . ] The CHARGE lamp lights up and does not blink again: If the CHARGE lamp goes out because the charging time has passed, there is no problem. The CHARGE lamp lights up and does not blink again: If the CHARGE lamp goes out because the charging time has passed, the problem is with the battery pack rst installed. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ] Do not use this unit in a narrow space such as between a wall and furniture. Attach the battery pack firmly to this unit when charging the battery pack. The battery terminal may be damaged if the battery pack is not attached correctly. To protect the battery pack, remove it from this unit when charging is completed. Do not drop or apply mechanical shock to this unit. Keep this unit away from TVs or AM receivers. Noise from this unit may enter a TV or radio if placed nearby. Unplug this unit from the wall outlet (wall socket) after use. To disconnect the power cord (mains lead), pull it out by the plug. Never pull the power cord (mains lead) itself. Be sure that nothing metallic comes into contact with the metal parts of this unit. When the CHARGE lamp goes out, normal charging is completed (Normal charge). For a full charge, which allows you to use the battery pack longer than usual, leave the battery pack in place for approximately another one hour (Full charge). 2 Connect the power cord (mains lead) to this unit and then to a wall outlet (wall socket) (See Illustration ). Power cord (Mains lead) Cordon d'alimentation Battery pack Normal charging time The following table shows the charging time for a battery pack that is completely discharged. Before operating this Battery charger, please read this manual thoroughly and retain it for future reference. To reduce fire or shock hazard, do not expose the unit to rain or moisture. to avoid electrical shock , do not open the cabinet. Do not expose the batteries to excessive heat such as sunshine, fire or the like. To reduce the risk of fire or electric shock, 1) do not expose the unit to rain or moisture. 2) do not place objects filled with liquids, such as vases, on the apparatus. refer servicing to qualified personnel only. [. . . ] To use the battery pack quickly You can remove the battery pack from this unit and use it even if charging is not completed. However, the charging time affects the time that the battery pack can be used. If the CHARGE lamp does not light up, check if the battery pack is firmly attached to this unit. When a fully charged battery pack is installed, the CHARGE lamp lights up once and then goes out. [. . . ]