User manual HOTPOINT LBF 520 X TK/HA

[. . . ] Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External dimensions of the appliance. . . . . . . . . . . . . . . . . . . . . . . Saving energy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 9 4. 5 Disposing of packaging WARNING Danger of suffocation due to packing material and plastic film!u Do not allow children to play with packing material. The packaging is made of recyclable materials: - corrugated board/cardboard - expanded polystyrene parts - polythene bags and sheets - polypropylene straps - nailed wooden frame with polyethylene panel* u Take the packaging material to an official collecting point. 6 Control 4. 6 Connecting the appliance NOTICE Risk of damage to the electronic control system!u Do not use stand-alone inverters (conversion of d. c. to a. c. / three-phase) or energy saving plugs. w The temperature is indicated again in the temperature display. 5. 2 Child proofing The child-proofing function enables you to make sure that the appliance is not inadvertently switched off by playing children. WARNING Fire and overheating hazard!u Do not use extension cables or multiple socket outlets. The type of current (alternating current) and voltage at the installation site have to conform with the data on the type plate (see Appliance at a glance). Connect the appliance only with a properly installed socket outlet with earthing contact. The socket outlet must be fused with 10 A or higher. It must be easily accessible so that the appliance can be quickly disconnected from the supply in an emergency. u To activate the setting mode: Press the SuperFrost button Fig. 3 (9) shines and the child lock symbol Fig. 3 (6) to select the brightness function. 3 (8) goes out and the brightness symbol Fig. u To confirm: Briefly press the SuperFrost button Fig. 3 (1). 5. 3 Door alarm u Using the setting button Fig. 3 (6), select either "off" or the brightness wanted. The more display fields of the temperature display that light up, the brighter it is. If no field is lit up, it means "off". u To confirm: Press the SuperFrost button Fig. w The brightness is adjusted to the new value. [. . . ] u Change the bulb under the operating panel as illustrated. The compressor switches to a low speed when little cold is The compressor runs for a long time. 6. 4 Customer service First check whether you can correct the fault yourself by reference to the list (see Malfunction). If this is not the case, please contact the customer service whose address is given in the enclosed customer service list. This noise comes from the refrigerant flowing in the refrigeru The sound is normal. The noise is produced whenever the refrigeration unit (motor) automatically switches on or off. ation circuit. A bubbling and gurgling noise. 10 Decommissioning u The sound is normal. A hum. [. . . ]