User manual HOTPOINT LD 20 IT

[. . . ] In addition, you will discover a world of useful hints and handy tips to help you get a better wash from your dishwasher and to make it last longer. 20) Installation, after delivery or your moving house, is the most important procedure for the correct operation of your dishwasher. That the electricity system is in accordance with norms; 2. That the water inlet and outlet hoses are connected correctly; 3. [. . . ] F C You can choose from six different positions. Always use salt which is intended for dishwasher use. The salt container is situated underneath the lower rack, fill it up as follows: 1. Pull out the lower rack completely, unscrew and remove the container cap 2. First fill the container up with water (you won't have to do this again next time) 3. Put the dishwasher funnel on the hole and pour in approximately two kilos of salt. It is normal that some water comes out of the container. The salt container should be filled up when the low salt indicator light "M" lights up and the words "add salt" scroll across the display. Never without salt Proper dosage of the rinse aid improves drying. If drops of water remain on the dishes or spotting occurs, turn the dosage adjuster to a higher setting. If, on the other hand, the dishes have white streaks, then turn the dosage adjuster down to a lower setting. Water hardness varies according to where you live. If the water in your home is hard, without water softening, incrustations would form on your dishes. Your dishwasher is fitted with a water softener which uses special salt to get rid of limescale in the water. Your dishwasher can adjust its salt consumption according to the hardness of the water in your home. It will add the correct quantity to the wash cycle, thus optimising and customising the salt consumption (not too much nor too little). At the end of the wash cycle, if your dishwasher detects a water hardness which is below the default threshold, the message "do not use any salt" will appear. To prevent rust from forming, load the salt just before beginning a wash cycle. 18 ARISTON DISHWASHER - Instructions for installation and use Language setting and demo programme Access to the menu Keep these two buttons pressed together for approximately 3 seconds to enter the menu. The button works as the "Mode" button: to allow you to scroll along the menu options. Button works as the The "Select" button: to allow you to select the selection shown by the display. The button works as the "Canc" button: to allow you to go back to the last menu level; press it repeatedly to quit the menu and go back to normal mode. [. . . ] Use a cloth dampened with lukewarm soapy water only. If there are any stains on the surface of the appliance interior, use a cloth dampened with water and a little white vinegar, or a cleaning product specifically made for dishwashers. When you go away for an extended period of time, we recommend you do the following: • run a cycle with the dishwasher empty • turn off the water inlet tap. • leave the appliance door ajar This will help the seals last longer and prevent unpleasant odours from forming inside the appliance. [. . . ]