User manual HOTPOINT LFS 213 IX TK/HA

[. . . ] Do not attach the lens directly to the E-mount camera or you may damage both. When you carry the camera with the lens attached, make sure to hold both the camera and the lens steadily. Do not hold by any part of the lens that protrudes when focusing. [. . . ] Only rotate the focusing ring manually when the camera is set to the direct manual focus, otherwise a malfunction may result. (Some cameras do not have the direct manual focus function. If your camera has this function, this restriction is explained in the section on focusing, in your camera's instruction manual. ) The focusing ring can be rotated slightly past the infinity to provide accurate focusing under various operating temperatures. Do not rotate the focusing ring all the way to the end when focusing manually even at infinity. When focusing manually, set your camera to the manual focus and rotate the focusing ring while looking through the viewfinder, etc. While the focus-hold button is pressed, auto focus function is suspended and the focus is fixed for shooting. The function of the focus-hold button can be changed on cameras with custom function capability. When using a built-in camera flash, make sure to remove the lens hood and shoot from at least 1m (3. While pressing and holding the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens. The line on the magnification scale which the edge of the outer lens barrel overlaps indicates the current magnification ratio (1:1 in illustration ). Use a tripod to steady the camera when shooting. 8 Macro: Fit the hood into the mount on the end of the lens barrel and rotate the hood clockwise until it clicks. 4 G: Align the red line on the lens hood with the red dot on the lens (Lens hood index). Turn the hood clockwise until the red dot on the lens meets the red dot on the hood and it clicks into place. Precautions on using a commercially available exposure meter or manual flash shooting function If your camera is set to the manual exposure mode and you are using a commercially available exposure meter, or if your camera is set to the manual exposure mode and you are using the Manual Flash Control function available on some external flash units, increase the exposure from the indicated value. Otherwise, the lens hood may interfere with the desired effect or may appear in pictures. When storing, turn over the lens hood and place it onto the lens backwards. [. . . ] When storing, turn over the lens hood and place it onto the lens backwards. , when adjusting by the aperture, +2 means opening the aperture 2 more stops. *2 The value of angle of view 1 is based on 35mm-format cameras, and that of angle of view 2 is based on Interchangeable Lens Digital Cameras equipped with an APS-C sized image sensor. [. . . ]