User manual HOTPOINT LIQ 68 DUO JADE

[. . . ] Gently shake the cartridge to loosen the toner. Shaking the cartridge will ensure maximum copies per cartridge. Ø 5 Ø Turn the toner locking lever upwards. Slide the new toner cartridge in until it locks in place. Ø 6 Ø Turn the toner locking lever downwards until it locks in place. Close the front cover and the side cover. [. . . ] The product returns to Standby mode. Ø Page 8 Loading Paper 1 Ø Ø Pull open the paper cassette. Push down on the pressure plate until it locks into position. 2 Ø Adjust the rear paper guide to the required paper length. It is preset to A4 or 8. 5 x 11" size depending on country. LG L FO LIO A4 LT R Ø To load another size, lift the rear guide out of the current position and into the required position. Rear Guide 3 Ø Fan the paper and insert it into the cassette. The paper cassette can hold a maximum of 550 sheets of 80 g/m2 (20 lb) plain paper. i Page 9 4 Ø Ensure that the paper is positioned under the snubber. Do not fill above the maximum fill line. Max Fill Line Snubber 5 Ø Position the side guide by squeezing the lever and sliding it toward the stack of paper, until it gently touches the side of the stack. Do not allow the guide to press against the edge of the paper tightly. Ø Close the paper cassette. Page 10 Setting Language (M15 only) 1 2 Ø Press [Menu/Exit], the first menu displays. Press [Enter]. WorkCentre M15 SYSTEM DATA [PAPER SIZE. . . ] Ø Ø Scroll to 'SELECT LANGUAGE' using the key. Using the or navigation keys select the language required. Press [Enter]. WorkCentre M15 SELECT LANGUAGE [ENGLISH] Ø Ø Page 11 Setting Language and Country (M15i only) 1 2 3 Ø Press [Menu/Exit], the first menu displays. WorkCentre M15i SYSTEM DATA [PAPER SIZE. . . ] Ø Scroll to 'SYSTEM SETUP' using the key. Press [Enter]. WorkCentre M15i SYSTEM SETUP [RECEIVE MODE. . . ] Ø Scroll to 'SELECT LANGUAGE' using the key. Using the or navigation keys select the language required. The COUNTRY option displays. WorkCentre M15i SELECT LANGUAGE [ENGLISH] Ø Ø Note: The Country option is not applicable in North America and Canada. Select [OK]. Run Ø Open: D:\XINSTALL. EXE Ø OK Cancel Browse. . . Ø Page 17 3 Ø Follow the on-screen instructions to complete the software installation. After installing the software reboot the PC. If the CD does not eject automatically, remove before rebooting. Ø Ø Page 18 Using the WorkCentre M15/M15i 1 Making Copies Ø Ensure 'READY TO COPY' displays. If not, press the [Copy/Fax/ Scan] key repeatedly until 'COPY MODE' displays and press [Enter]. Load originals using the Automatic Document Feeder or the Document Glass. Select the Copy features required, enter the quantity and press Start. Status Ø WorkCentre M15 READY TO COPY 100% 001 Ø Reduce/Enlarge % Ø Number of Copies 2 Printing Ø Open the application required for the document and select an existing document or create a new document. Ensure the WorkCentre M15 Series is selected, and program the print options required for the job. Select [OK] on all dialog boxes to print the job. Ø Ø Page 19 3 Sending a Fax (M15i only) Ø Load originals using the Automatic Document Feeder or the Document Glass. If not, press the [Copy/Fax/Scan] key repeatedly until 'FAX MODE' displays and press [Enter]. Select the Fax features required, enter the fax number and press Start. Current Date Memory % Available Ø WorkCentre M15i 11 - DEC - 2002 15:11 100% FAX Ø Current Time Mode Selected 4 Scanning a Document to File (M15i only) Ø Load originals using the Automatic Document Feeder or the Document Glass. Start the scan application program being used to acquire the scanned image. [. . . ] Select the Fax features required, enter the fax number and press Start. Current Date Memory % Available Ø WorkCentre M15i 11 - DEC - 2002 15:11 100% FAX Ø Current Time Mode Selected 4 Scanning a Document to File (M15i only) Ø Load originals using the Automatic Document Feeder or the Document Glass. Start the scan application program being used to acquire the scanned image. Follow the instructions provided with the application program to scan the document and retrieve it at the PC. Status Ø WorkCentre M15i READY TO SCAN Ø Note: When using Paperport software to scan your job, the application will create a separate file for each scanned page of the job. These separate pages can then be merged within the Paperport application. Page 20 ControlCentre 5. 0 Using the Xerox WorkCentre M15i ControlCentre 5. 0, Fax System Data options can be set up, phonebook entries can be created and edited and setup information can be viewed on the PC. [. . . ]