User manual HOTPOINT LSTA 216 A.1/HA

[. . . ] 12 Operating instructions DISHWASHER EN English, 13 Contents Product Fiche, 14 Precautions and advice, 15 General safety Disposal Saving energy and respecting the environment EN Installation et Assistance, 16-17 Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data Assistance Ecodesign Regulation Description of the appliance, 18 LSTA+ 216 A. The standard cleaning cycle corresponds to the Eco cycle. 2) Based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes. Actual energy consumption depends on how the appliance is used. [. . . ] The use of tablets is only recommended for models which offer the MULTI-FUNCTIONAL TABLETS option. To achieve the best results from each washing and drying cycle, powder detergent, rinse aid liquid and salt should be used. Pour in the detergent after consulting the Table of wash cycles: • For powder detergent use compartments A and B. € For detergent in tablet form: C when the cycle requires 1 tablet, place it in compartment A and close the cover; when it requires 2, place the second tablet at the bottom of the appliance. Remove detergent residues from the edges of the compartment and close the cover until it clicks. D A B - The machine will switch off automatically during certain periods of inactivity, in order to minimise electricity consumption. Modifying a wash cycle in progress If a mistake was made during the wash cycle selection process it is possible to change the cycle, provided that it has only just begun: open the door, taking care to avoid the escaping steam, and press and hold the ON/OFF button; the machine will switch off with a long beep. Switch the machine back on using the ON/OFF button and select the new wash cycle using the P button; start the cycle by closing the door. Adding extra crockery Without switching off the machine, open the door, taking care to avoid the escaping steam, and place the crockery inside the dishwasher. Close the door: the cycle starts from the point at which it was interrupted. Accidental interruptions If the door is opened during the wash cycle, or if there is a power cut, the cycle stops. It starts again from the point at which it was interrupted once the door has been shut or the electricity supply is restored. 20 Wash cycles If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly. The number and type of wash cycles and options may vary depending on the dishwasher model. 3:00’ Environmentally-friendly wash cycle with low energy consumption levels, suitable for pans and dishes. Preliminary wash cycle for dishes while the load is awaiting completion with the dishes from the next meal. extremely soiled dishes and pans (not to be used for delicate items). Economic and fast wash to be used for lightly soiled dishes. (Run cycle immediately after use) (2 plates + 2 glasses + 4 pieces of cutlery + 1 saucepan + 1 small frying pan). Economic and fast wash for delicate items which are sensitive to high temperatures. (Run cycle immediately after use) (glasses upper rack + delicate plates, lower rack). Eco* 21 g (A) 4 g (B) 21 g (A) 4 g (B) Yes 1 (A) Yes 1:50’ Normal No Soak 25 g (A) Intensive No No No 0:08’ 25 ml (A) 1 (A) Yes 2:25’ 21 g (A) Rapid 21 g (A) 1 (A) No 0:35’ 25 g (A) Crystal 25 g (A) 1 (A) Yes 1:35’ Notes: Optimum performance levels when using the “”Rapid wash” cycle can be achieved by observing the maximum amounts of crockery specified. [. . . ] • The rinse aid dosage is too high. € • • • • • • • • A wash cycle without a drying program has been selected. The rinse aid has been used up or the dosage is too low (see Rinse aid and salt). The rinse aid dispenser setting is not suitable. [. . . ]