User manual HOTPOINT LSTB 6B019 EU

[. . . ] Read the instructions carefully, as they include important information on safe installation, use and maintenance. This appliance was designed for domestic use or similar applications, for example: - farmhouses; - use by guests in hotels, motels and other residential settings; - bed & breakfasts. Remove the appliance from all packaging and make sure it was not damaged during transportation. If it was damaged, contact the retailer and do not proceed any further with the installation process. [. . . ] Remove the lower rack and unscrew the container cap (anticlockwise). Only the first time you do this: fill the water dispenser up to the edge. Position the funnel (see figure) and fill the salt container right up to its edge (approximately 1 kg); it is not unusual for a little water to leak out. Remove the funnel and wipe any salt residue away from the opening; rinse the cap under running water and then screw it on. It is advisable to perform this procedure every time you add salt to the container. Make sure the cap is screwed on tightly, so that no detergent can get into the container during the wash cycle (this could damage the water softener beyond repair). Whenever you need to add salt, we recommend carrying out the procedure before the washing cycle is started. 1 - 9 Average autonomy salt dispenser with 1 wash cycle per day months 7 months 5 months 3 months 2 months 2/3 weeks EN Measuring out the refined salt For values between 0°f and 10°f, we do not recommend the use of salt. The rinse aid dispenser should be filled: • When the LOW RINSE AID indicator light on the panel/display is lit *; • When the dark optical indicator on the dispenser door “E” becomes transparent. Open the dispenser by turning the cap "G" in an anticlockwise direction. Pour in the rinse aid, making sure it does not overflow from the dispenser. For optimum washing performance, avoid positioning bulky crockery directly below the tray. ) EN If the rack is equipped with a Lift-Up device* (see figure), lift it up by holding its sides. To restore the lower position, press the levers (A) at the sides of the rack and follow the rack down. € Parts in synthetic material which do not withstand high temperatures. The colours of glass decorations and aluminium/silver pieces can change and fade during the washing process. Crystal objects) can become opaque after a number of wash cycles too. Tips: • Only use glasses and porcelain guaranteed by the manufacturer as dishwasher safe. • Use a delicate detergent suitable for crockery. € Collect glasses and cutlery from the dishwasher as soon as the wash cycle is over. 29 Detergent and dishwasher use EN Measuring out the detergent Good washing results also depend on the correct amount of detergent being used. Exceeding the stated amount does not result in a more effective wash and increases environmental pollution. [. . . ] Strongly push the door until a “clacking” noise is heard. € The dishes are rattling against each other or against the sprayer arms. Place the dishes properly and make sure the sprayer arms can rotate freely. € Too much foam: the detergent has not been measured out correctly or it is not suitable for use in dishwashers. [. . . ]