User manual HOTPOINT LTF 11M132 C EU

[. . . ] Eco* Partenza Ritardata – Tabs – Extra Dry Partenza Ritardata – Tabs – Extra Dry – Short Time – Zone wash Partenza Ritardata – Tabs – Extra Dry – Short Time – Zone wash Partenza Ritardata – Tabs Partenza Ritardata – Tabs – Extra Dry – Short Time Si 2. 13 Operating instructions DISHWASHER EN EN English, 14 Contents Precautions, advice and Assistance, 15-16 General safety Disposal Saving energy and respecting the environment Assistance Installation, 17-18 Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data Description of the appliance, 19 Overall view Control panel LTF 11M132 Loading the racks, 20-21 Lower rack Cutlery basket Upper rack Cutlery tray Adjusting upper rack Start-up and use, 22 Starting the dishwasher Measuring out the detergent Wash cycles, 23 Table of wash cycles Ecodesign Regulation Special wash cycles and Options, 24 Rinse aid and refined salt, 25 Measuring out the rinse aid Measuring out the refined salt Care and maintenance, 26 Shutting off the water and electricity supplies Cleaning the dishwasher Preventing unpleasant odours Cleaning the sprayer arms Cleaning the water inlet filter Cleaning the filters Leaving the machine unused for extended periods Troubleshooting, 27 14 Precautions, advice and Assistance This appliance was designed and manufactured in compliance with international safety standards The following information has been provided for safety reasons and should therefore be read carefully. Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine. [. . . ] Shut the door and the cycle will begin from the point at which it was interrupted. Accidental interruptions If the door is opened during the wash cycle, or if there is a power cut, the cycle stops. It starts again from the point at which it was interrupted once the door has been shut or the electricity supply is restored. 22 Wash cycles The number and type of wash cycles and options may vary depending on the dishwasher model. Instructions on wash-cycle selection and detergent dosage Environmentally-friendly wash cycle with low energy consumption levels, suitable for pans and dishes. 25 gr/ml – 1 Tab Wash spread over the three* racks: normal in the upper rack and third* rack for cutlery and glasses, heavy-duty in saucepans in the lower rack. 35 gr/ ml – 1 Tab Economical and fast wash for delicate items which are sensitive to high temperatures - run immediately after use (glassware in the upper rack + fragile plates in the lower rack). 35 gr/ml – 1 Tab Economical and fast wash to be used for lightly soiled dishes - run immediately after use (2 plates + 2 glasses + 4 pieces of cutlery + 1 saucepan + 1 small frying pan). 25 gr/ml – 1 Tab This guarantees optimal performance , reduced consumption levels and silent operation. It is ideal for night-time operation of the appliance. 35 gr/ml – 1 Tab Pre-wash for dishes while awaiting completion of the load with the dishes from the next meal. No detergent Disinfecting wash cycle suitable for washing bottles, rings and teats together with plates, cups, glasses and cutlery. The crockery should only be loaded on the upper rack. 30 gr/ml - 1 Tab Disinfecting cycle for cleaning the inside of the dishwasher, to be carried out only when the dishwasher is EMPTY using specific detergents designed for dishwasher maintenance. Eco* Wash cycles with drying Yes Options Delayed start – Tabs – Extra Dry Delayed start – Tabs – Extra Dry – Short Time – Zone wash Delayed start – Tabs – Extra Dry – Short Time – Zone wash Delayed start – Tabs Approximate duration of wash cycles 3:10’ 2. ECODESIGN REGULATION ECO wash cycle is the standard cycle to which the energy label data refers; this cycle can be used to wash crockery with a normal soil level and is the most efficient in terms of energy and water consumption for this type of crockery. To reduce consumption even further, only run the dishwasher when it is full. Standby consumption: Left-on mode consumption: 5 W – Off mode consumption: 0, 5 W Consumption data table for the main cycles Standard conditions* Energy consumption (kWh/cycle) Water consumption (l/cycle) Duration (min/cycle) User conditions** Energy consumption (kWh/cycle) Water consumption (l/cycle) Duration (min/ cycle) INTENSIVE NORMAL 1, 50 1, 20 15 15 150 120 1, 25 1, 00 14 14 135 110 * Cycle data refers to the values recorded in a laboratory, in accordance with European standard EN 50242. ** Data is obtained by recording values when the appliance is operational and loaded with user crockery. 23 Special wash cycles and Options EN Notes: Optimum performance levels when using the “Fast" and "Express 30’” cycles can be achieved by respecting the specified number of place settings. * The Eco wash cycle complies with regulation EN-50242. Although it has a longer duration than other wash cycles, it uses less energy and is less harmful to the environment. [. . . ] €¢ The dishes are rattling against each other or against the sprayer arms. €¢  xcessive foam presence: the detergent has not been measured out correctly or it is not E suitable for use in dishwashers. €¢  he level of the refined salt is low or the dosage setting is not suited to the hardness of the T water (see Rinse aid and salt). €¢ The lid on the salt dispenser is not closed properly. [. . . ]