User manual HOTPOINT MBL 1911 FA

[. . . ] 12 Operating Instructions REFRIGERATOR/FREEZER COMBINATION Contents I Italiano, 1 GB English, 13 F Français, 25 Installation, 14 GB Positioning and connection Aqua Care function Description of the appliance, 15-16 Control panel Overall view D Deutsch, 37 NL Nederlands, 49 Accessories, 17 Start-up and use, 18-19 Starting the appliance Chiller system Using the refrigerator to its full potential Using the freezer to its full potential Holiday function MBL 1911 FA Maintenance and care, 20 Switching the appliance off Cleaning the appliance Avoiding mould and unpleasant odours Replacing the light bulb Replacing the l Odour filter Replacing the Aqua Care filter Precautions and tips, 21 General safety Disposal Respecting and conserving the environment Troubleshooting, 22-23 Assistance, 24 Installation GB !Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. [. . . ] Store all food in such a way as to ensure air can circulate freely between different items. Keep the inside of your fridge clean, taking care not to use oxidiser or abrasive products. Remove all food past its expiry date from the refrigerator. For the correct preservation of food, all easily perishable items (soft cheeses, raw fish, meat, etc. ) should be stored in the coldest zone of the fridge compartment, i. Just above the salad crisper where the temperature indicator is situated. Chiller system No Frost The No Frost system circulates cold air continuously to collect humidity and prevent ice and frost formation. The system maintains an optimal humidity level in the compartment, preserving the original quality of the food, preventing the food from sticking together and making defrosting a thing of the past. Do not block the aeration cells by placing food or containers in direct contact with the refrigerating back panel. 16 Using the freezer to its full potential • Use the FREEZER OPERATION knob to adjust the temperature (see Description). • Do not re-freeze food that is defrosting or that has already been defrosted. These foods must be cooked and eaten (within 24 hours). • Fresh food that needs to be frozen must not come into contact with food that has already been defrosted. Fresh food must be stored in the top FREEZER and STORAGE compartment where the temperature drops below -18°C and guarantees rapid freezing. • Do not place glass bottles which contain liquids, and which are corked or hermetically sealed in the freezer because they could break. • The maximum quantity of food that may be frozen daily is indicated on the plate containing the technical properties located on the bottom left side of the refrigerator compartment (for example: Kg/24h: 4). • To freeze (if the freezer is already operating): press the rapid freezing SUPER FREEZE button (corresponding yellow indicator light illuminates), insert the food and close the door. The function is disabled automatically after 24 hours or when optimal temperatures have been reached (indicator light goes out); !To avoid blocking the air circulation inside the freezer compartment, it is advisable not to obstruct the ventilation holes with food or containers. Replacing the Aqua Care filter The Aqua Care system is fitted with an internal meter which guarantees filtering safety. The filter is guaranteed for a maximum volume of 1500 l of water, although this may vary according to the condition and pressure of the water supply. Once this limit has been reached, the water supply will stop, the corresponding alarms are activated (see Troubleshooting) and the filter must be replaced. [. . . ] To restore normal operation bring the FREEZER OPERATION knob setting (off) and turn the appliance on again. To Heating danger + buzzer The AQUA CARE LED flashes slowly • The Aqua Care filter is about to wear out The blocked water is drained and the • The Aqua Care filter is worn out and needs to be replaced (see Maintenance and care) AQUA CARE LED flashes quickly • The Aqua Care safety blocking system has been activated due to The blocked water is drained, the prolonged supply (5 consecutive minutes). To reset the alarm, simply AQUA CARE LED is switched off and release the dispenser button. To silence the alarm, open and close the the alarm sounds door. [. . . ]