User manual HOTPOINT NMTM 1921 F

[. . . ] Diversity technology use two tuners and two antennas to create the clearest TV signal. Next, click on Step 2: Install WinTV and select your language from the list. Plug the portable TV antenna or your roof top aerial, using the IEC to MCX connector, into the WinTV's TV MCX Connector (WinTV-NOVA-TD only). Ote: During the installation, other installation wizards may open, we recommend following the instructions in each of these and installing with the default options available. [. . . ] For example, if you want to repeat the audio/video you saw 10 seconds ago, you would click the Replay button once. If you want to see the video you saw one minute ago, you would need to click the Replay button six times. For extended replay times, you might find it more convenient to grab the Video Position indicator control bar and move it to the left. Once you let the control bar go, audio/video starts to play (it might take a few seconds for the WinTV application to start playing). You might have to move the Video Position indicator to the left and right to find the desired spot to start replaying audio/video. While Replaying, your audio/video program continues to be recorded in the Replay Buffer. Therefore, if you have clicked the Replay button 3 times (so that you are replaying the audio/video seen 30 seconds ago), the video you see in the WinTV window will be 30 seconds behind the live program. In the File menu you can: Rename your recorded video file: To rename a video file, find the file you would like to rename, highlight it with your mouse, and click and hold the right mouse button. Go down to Rename and then you can type in a new name. Remember: you must keep the MPG extension on the file. Play a video file previously recorded: Find the file you would like to play, highlight it with your mouse (one click of the mouse button) and click Open. Clicking the Fast Forward button two times will fast forward your video at 8X speed. Clicking the Rewind button again will continue the playing of the video. Clicking the Fast Foward button two times will fast foward your video at 8X speed. Clicking the button again will continue playing back at normal speed. WinTV-Scheduler works by using the Windows Task Scheduler to launch WinTV at the chosen time. WinTV-Scheduler sets up a command line in Task Scheduler to run WinTV, specifying a TV channel and a length of time to record. Ote: You cannot access the Wing settings until you have purchased the optional transcoder software, for more informations see www. Ote: It is always possible that your TV show will be transmitted in advance or late, and it takes about 10 seconds to launch the WinTV and set up for recording. Please set the Time to Begin Progam few minutes before the time your TV show should starts. Program Duration: set the duration of this event, using the arrows (steps of 30 minutes) or directly the keyboard. Change this if you want to schedule on another date. [. . . ] Holding the Skip button will auto-repeat, and advances the video about 10 minutes per 15 seconds the button is depressed I< (Replay): Skips backward in the Pause buffer by 10 seconds per click. Holding the Replay button will auto-repeat, and advances the video about 10 minutes per 15 seconds the button is depressed Quick Jump 0 to 9 buttons: When playing a video, you can quickly skip through the video by pressing the 0-9 buttons. When you press one of these buttons, you will skip to, for example, 10% of the video file when you press '1', 20% of the video file when you press '2' and so forth (% of the length of the file). During Pause-Mode, any key skips ahead in the Pause buffer to -2 seconds. [. . . ]