User manual HOTPOINT OK 892EL S P X AUS

[. . . ] OK OK OK OK 892EL 892EL 892EL 892EL P P S S X AUS S AUS S P X AUS P AUS English Operating Instructions OVEN Contents Operating Instructions, 1 Warnings, 2 Assistance, 3 Description of the appliance, 4 Description of the appliance, 5 Installation, 6 Electrical Connection, 7 Start-up and use, 8 Cooking modes, 9 Precautions and tips, 13 Maintenance and care, 13 Troubleshooting, 16 AUS Warnings WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. [. . . ] If the temperature inside the oven is higher than the suggested value for the selected mode, the text “Hot” appears on the display and it will not be possible to begin cooking; wait for the oven to cool. When the cooking stage has been reached, the oven buzzer sounds. Do not open the oven door as this will disrupt the cooking time and temperature. Automatic cooking modes Programming cooking !A cooking mode must be selected before programming can take place. Programming the cooking duration icon until the icon and the numerical 1. Press the digits on the display begin to flash. Turn the TIMER knob towards “ ” and “ ” to adjust the time as desired; keep the knob in position to scroll through * Only available in certain models. 10 the numbers more quickly and make the setting process easier. Once you have reached the desired duration, press the icon again. The display will show the duration and set temperature alternately. When cooking has finished, “END” appears on the display and a buzzer sounds. and a duration of 1 hour and 15 minutes is programmed. The programme will stop automatically at 10:15 a. m. Setting the end time for a cooking mode !A cooking duration must be set before the cooking end time can be scheduled. For the delayed programming to work properly, the clock should be set to the correct time. Follow steps 1 to 3 to set the duration as detailed above. Press the icon twice: the icon and the numerical digits on the display will begin to flash. Turn the TIMER knob towards “ ” and “ ” to adjust the cooking end time value. Once you have reached the desired end time, press the icon again. The display will show the duration, the cooking end time and the set temperature alternately. Press the icon to activate the programmed mode. BARBECUE • Place the rack in position 3 or 4. Position the food in the centre of the rack. [. . . ] Press the icon to activate the programmed mode. With the FAST CLEAN mode, the internal temperature of the oven reaches 500°C. The pyrolytic cycle is activated, burning away food and grime residues. Keep children away from the appliance during the automatic cleaning cycle as surfaces may become very hot. Particles may ignite inside the oven as a result of the combustion process. [. . . ]