User manual HOTPOINT SBD 2012 IZF/HA

[. . . ] 12 Operating Instructions REFRIGERATOR/FREEZER COMBINATION Contents I Italiano, 1 GB English, 13 F Français, 25 Installation, 14 GB Positioning and connection Reversible doors Description of the appliance, 15-16 Control panel Overall view E Espanol, 37 PT Portuges, 49 Start-up and use, 17-18-19-20 Starting the appliance Navigating the display Chiller system Evwer Fresh Using the refrigerator to its full potential Using the freezer to its full potential Maintenance and care, 21 SBD 2011 IZF/HA SBD 2012 IZF/HA Switching the appliance off Cleaning the appliance Avoiding mould and unpleasant odours Replacing the light bulb Precautions and tips, 22 General safety Disposal Respecting and conserving the environment Troubleshooting, 23 Assistance, 24 Installation GB !Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. [. . . ] Using Ever Fresh to its full potential The following information is a guide on how to get the best from the Ever Fresh system and the food it stores. Ever Fresh containers • Do not clean the lids in a dishwasher. • The maximum fill level marked on the container must be respected when storing liquids of any kind. Vacuuming actual liquid from the container may damage the Ever Fresh pump. • Repeated opening of the vacuumed containers may disturb the storage conditions of the food inside. • Before using the system, make sure there is no visible damage on any part of the container. The container valve has a built-in security system. If, after you have created a vacuum, the valve moves upward within three days, check the lid has been put on the container properly and/or that the container is intact. Check the storage status of the food before repeating the vacuum storage operation. see Activating and deactivating Ever Fresh. • The containers were designed to come into direct contact with food. • Do not use the containers for any type of cooking (in the microwave or oven, on an electric plate, over a flame, etc. • Do not put the containers in the freezer. 1 2 Using the freezer to its full potential • The Cool Care Zone is a special compartment inside the freezer which allows the user to select any of the 4 different operating modes in accordance with specific requirements and the type of food stored inside. The temperature values that may be selected are -8°C, 12°C, -18°C; these values are indicated by the icons on the display. The Cool Care Zone is equipped with controls that may be operated independently from the other compartments inside the freezer; the Cool Care 19 GB Zone may also be deactivated using the display, so that it can then be used as a normal freezer compartment. • Adjust the temperature using the display. • The Cool Care Zone is a compartment that allows several types of food to be frozen at the most suitable temperature (fruit, ice cream and alcoholic drinks); the other two storage compartments (see overall view) are designed to store frozen foods under normal conditions. to freeze foods in safely and correctly , follow the instructions below. For a small quantity (less than half of the maximum amount shown on the data plate): - if the Cool Care Zone is activated, place the food in the two storage compartments, making sure that it does not come into contact with any food that has already been frozen; press the rapid-freezing SUPER FREEZE button (the corresponding LED lights up) and close the door. The function deactivates automatically after 24 hours or when the inside of the compartment has reached the optimal temperature (the LED switches off). - if the Cool Care Zone is not activated the first compartment may also be used: place the food inside and repeat the same steps as detailed above. [. . . ] To silence the buzzer, press the ALARM RESET button or one of the freezer temperature adjustment buttons, or open and close the refrigerator door. To remove the “A2” message from the display and restore normal freezer operation, press one of the freezer temperature adjustment buttons twice or switch the product off and on again. The alarm sounds, the ALARM icon flashes on the display and “A2” appears on the freezer display. The refrigerator and the freezer do not • The doors do not close properly or the seals are damaged. [. . . ]