User manual HOTPOINT UPS 1711 F

[. . . ] You can attach a filter or front lens cap to the lens hood as well. Depending on the filter you use, you can attach the lens hood after attaching the filter to the lens. 5 Macro only) When storing, fit the lens hood onto the lens backwards. [. . . ] 5 Macro only) When storing, fit the lens hood onto the lens backwards. 8 OSS: Fit the hood into the mount on the end of the lens barrel and rotate the hood clockwise until it clicks. When using a built-in camera flash or a flash supplied with the camera, remove the lens hood to avoid blocking the flash light. When storing, fit the lens hood onto the lens backwards. After the camera focuses in auto focus, you can make a fine adjustment manually. 5 Macro) Precautions on using a commercially available exposure meter or manual flash shooting function This instruction manual explains how to use lenses. Precautions common to all lenses such as notes on use are found in the separate "Precautions before using". To reduce this phenomena (called vignetting), close the aperture by 1 to 2 stops. Remove the rear and front lens caps and the camera body cap. You can attach/detach the front lens cap in two ways, (1) and (2). Align the white index on the lens barrel with the white index on the camera (mounting index), then insert the lens into the camera mount and rotate it clockwise until it locks. Not press the lens release button on the camera when Do mounting the lens. *1 The value shown above for equivalent 35mm-format focal length is for Interchangeable Lens Cameras equipped with an APS-C sized image sensor. *2 Minimum focus is the distance from the image sensor to the subject. [. . . ] Not press the lens release button on the camera when Do mounting the lens. *1 The value shown above for equivalent 35mm-format focal length is for Interchangeable Lens Cameras equipped with an APS-C sized image sensor. *2 Minimum focus is the distance from the image sensor to the subject. [. . . ]