User manual HOTPOINT UT 104S P.20/HA

[. . . ] This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass. [. . . ] Start the rotisserie function by selecting the or modes; !When mode is on, the rotisserie will stop if the door is opened. The cooking cycle stops automatically and the oven indicates when the dish is cooked. You may start cooking whether the oven has been preheated or not. The cooking duration can be customised according to personal taste by modifying the relevant value - before cooking begins - by 5/20 minutes depending on the selected programme. The duration can however be modified even once cooking has begun. If the temperature inside the oven is higher than the suggested value for the selected mode, the text ?Hot?appears on the TEMPERATURE display and it will not be possible to begin cooking; wait for the oven to cool. When the cooking stage has been reached, the oven buzzer sounds. Do not open the oven door as this will disrupt the cooking time and temperature. BEEF mode Use this function to cook beef, pork and lamb. Place the dish in the oven while it is still cold. The dish may also be placed in a preheated oven. TARTS mode This function is ideal for all tart recipes (which normally need to be heated well from underneath). Place the food inside the oven while it is still cold. The dish may also be placed in a preheated oven. Press the button and repeat steps 1 to 3 as described for the duration setting. Then press the button and set the end time using the and buttons. Once you have reached the desired end time, press the button again. Press the button to activate the programmed mode. The and buttons will flash alternately to indicate that programming has taken place; in the time before cooking starts, the TIME display will show the duration and the cooking end time alternately. appears on the TEMPERATURE display and a buzzer sounds. [. . . ] If the oven is too hot, the pyrolytic cycle may not start. The programme may only be started once the oven door has been closed. to activate the Fast Clean programme: 1. Switch the control panel on by pressing the button. [. . . ]